Search Results for 'Samsung'

GCam Port | Google Camera APK v9.6 (February 2025) › Forums › Search › Search Results for 'Samsung'

Viewing 10 results - 91 through 100 (of 641 total)
1 2 3 … 9 10 11 … 63 64 65
  • Author
    Search Results
  • September 3, 2024 at 12:56 PM #4396

    Topic: Download and Update Galaxy Xcover 3 (G389F – Romania) to Marshmallow OTA Manually

    in forum Galaxy Xcover 3 – g389f
    Linux User
    Participant

    Samsung Galaxy Xcover 3 G389F Romania devices are getting official Android 6.0.1 Marshmallow update. Here is a very simple Step By Step guide to update the Marshmallow Update Manually on the Samsung Galaxy Xcover 3 G389F if you are in Romania. Just grab the Firmware update using the SamFirm utility as explained in the below section and then follow the manual OTA update process to get the latest update.

    Before downloading the OTA and update the same manually, you should check if the OTA is available for your device or not.
    To check for the OTA Update, Go to Settings -> About Phone -> Software Update -> Check for Update

     

    DISCLAIMER:
    Manually updating the firmware will WIPE EVERYTHING on your phone. Make sure you do a backup using a synchronization application or using Samsung Smart Switch or if you have TWRP installed then you can take a NANDROID backup using the TWRP itself. I am not at all responsible if anything happens to your phone as a consequence of following this guide but I can assure you that I will help you as far as possible to get you out of the problem (if something happens).

     

    GALAXY Xcover 3 G389F Romania Android 6.0.1 MARSHMALLOW
     

    REQUIRED DOWNLOADS AND RELEVANT LINKS TO UPDATE SAMSUNG GALAXY Xcover 3 G389F ROMANIA MARSHMALLOW:

     

    For more Custom ROMs, TWRP Recovery Installation guide, Rooting Guide you can have a look at the Galaxy Xcover 3 forum and also you can subscribe to stay updated for this device specific topics.

    INSTALLING THE SAMSUNG GALAXY Xcover 3 G389F Romania Android 6.0.1 MARSHMALLOW UPDATE:

    1. Download and install the Samsung drivers for your phone.
    2. Download and install the ODIN application on your PC before proceeding further.
    3. Download the latest Marshmallow OTA update from Samsung Servers using the SamFirm Firmware Samsung Stock Firmware download utility using the following guide:
      – Here I have compiled a guide explaining How To Download Stock Samsung Firmware easily and Quickly Using SamFirm.
    4. After downloading the OTA update install the stock OTA update using the ODIN application using the following guide:
      – Here is the Samsung Stock Firmware Flashing guide Using ODIN.

    DONE!!! Your phone will now be booting into the Latest Samsung Galaxy Xcover 3 G389F Android 6.0.1 MARSHMALLOW Update. If you have any concerns while following this update then just login to comment. Till the next update just stay tuned.

    September 3, 2024 at 12:56 PM #9004

    Topic: Galaxy S DUOS 2 CM14.1 (CyanogenMod 14.1, Nougat ROM)

    in forum Galaxy S Duos 2 – S7582
    Linux User
    Participant

    CM14.1 for Galaxy S DUOS 2 CM14.1/CyanogenMod 14.1 has now arrived through an UNOFFICIAL build. In addition to this CM14.1. ROM we also have the Lineage OS 14.1 for Galaxy S DUOS 2. For latest updates, stay tuned to the Lineage OS device list page. Since Google released Android Nougat Source code, we have update many Android NOUGAT AOSP ROMs and also many CyanogenMod 14/CM14 ROMs updated and many are yet to come. This CyanogenMod 14.1/CM14.1 for Galaxy S DUOS 2 is brought to you by developer ishant.

    DISCLAIMER:
    THIS IS STILL AN EARLY BUILD. THIS ROM MAY NOT BOOT AT ALL OR EVEN IF IT BOOTS IT MAY CONTAIN MANY BUGS THAN YOU CAN IMAGINE MAKING IT UNUSABLE AS A DAILY DRIVER. TRY AT YOUR OWN RISK. Installing custom ROM requires a custom recovery to be installed on your device, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup your all data. You are the only person doing changes to your phone and neither the developer(s) nor we can be held responsible for the mistakes done by you.

    Status of (s7582, kyleprods) Galaxy S DUOS 2 CM14.1/CyanogenMod 14.1 Nougat 7.1 ROM:

    WHAT’S WORKING:
    – Not Known
    KNOWN ISSUES:
    – Not Known

     

    Galaxy S DUOS 2 CM14.1/CyanogenMod 14.1 Nougat 7.1 ROM

    REQUIRED LINKS AND FILES FOR GALAXY S DUOS 2 CM14.1/CYANOGENMOD 14.1 NOUGAT 7.1 CUSTOM ROM:

    Root binary is inbuilt since CyanogenMod 12, so you don’t need a separate SuperSu package to install to gain ROOT access. Here is How to Enable ROOT on CM14.1/CyanogenMod 14.1

    HOW TO INSTALL/DOWNLOAD/FLASH/UPDATE GALAXY S DUOS 2 CM14.1/CYANOGENMOD 14.1 (s7582, kyleprods) NOUGAT 7.1 CUSTOM ROM:

    1. Follow this if you are flashing Galaxy S DUOS 2 CM14.1/CyanogenMod 14.1 for the first time, or coming from another ROM:

      This will delete all your data on your phone. You may consider backing up your phone data or take a nandroid backup. Here is how to take NANDROID backup using TWRP recovery.

      Points to NOTE:
      – Try to avoid restoring apps backup using Titanium Backup. It may break things up.
      – Don’t restore system data using Titanium Backup! It will definitely break the current installation.
      – It is also discouraged to Restoring Apps + Data using Titanium Backup.

    2. Upgrading from earlier version of CyanogenMod 14.1/CM14.1 for S DUOS 2:

    Complete the initial setup and enjoy Android Nougat 7.1 with CyanogenMod 14.1/CM14.1 for S DUOS 2 (s7582, kyleprods). After this CM14.1 installation you may want to enable ROOT access on your phone and here is how you can do that:
    How to Enable ROOT on CM14.1/CyanogenMod 14.1.

    Stay tuned or Subscribe to the Galaxy S DUOS 2 (s7582, kyleprods) forum For other Android Nougat ROMs, CyanogenMod 14.1 ROMs, other ROMs and all other device specific topics.

     

    September 3, 2024 at 12:56 PM #14892

    Topic: LineageOS 14.1 for Galaxy TAB 3 8.0 LTE, Android 7.1 ROM

    in forum Galaxy Tab 3 8.0 Wifi – SM-T310, lt01wifi
    Linux User
    Participant

    Android Nougat 7.1 ROM, LineageOS 14.1 for Galaxy TAB 3 8.0 LTE has now arrived via an UNOFFICIAL build. If you want some more LineageOS ROMs or wanna taste the OFFICIAL LineageOS build then stay tuned to the LineageOS 14.1 ROM collection page. This Galaxy TAB 3 8.0 LTE LineageOS 14.1 is brought to you by developer gr8nole.

    DONATION TO DEVELOPER:

    If you like gr8nole’s work and want him to keep up this good work then consider a donation to gr8nole.

    DISCLAIMER:
    THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK. Installing a custom ROM on a Galaxy TAB 3 8.0 LTE (lt01lte, SM-T315) may require the bootloader to be unlocked, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

    Status of LineageOS 14.1 for Galaxy TAB 3 8.0 LTE Nougat 7.1 ROM:

    WHAT’S WORKING:
    – Not Known
    KNOWN ISSUES:
    – Not Known

     

    LineageOS 14.1 for Galaxy TAB 3 8.0 LTE

    REQUIRED LINKS AND FILES FOR LineageOS 14.1 for Galaxy TAB 3 8.0 LTE NOUGAT 7.1 BASED CUSTOM ROM:

    Root binary is NOT inbuilt in LineageOS 14.1, so you may need a separate SuperSu package or LineageOS su binary to install to gain ROOT access. Here is How to Enable ROOT on LineageOS 14.1
    If there is no in-built ROOT or it does not work for some reason then you can try flashing SuperSU zip using recovery to gain ROOT access.

    HOW TO INSTALL/DOWNLOAD/FLASH/UPDATE Galaxy TAB 3 8.0 LTE LineageOS 14.1 NOUGAT CUSTOM ROM:

    1. Follow this if you are flashing LineageOS 14.1 for Galaxy TAB 3 8.0 LTE (lt01lte, SM-T315) for the first time, or coming from another ROM:

      Points to NOTE:
      – Try to avoid restoring apps backup using Titanium Backup. It may break things up.
      – Don’t restore system data using Titanium Backup! It will definitely break the current installation.
      – It is also discouraged to Restoring Apps + Data using Titanium Backup.

    2. Upgrading from earlier version of Galaxy TAB 3 8.0 LTE LineageOS 14.1 (lt01lte, SM-T315):

    Complete the initial setup and enjoy Android Nougat 7.1 with LineageOS 14.1 for Galaxy TAB 3 8.0 LTE (lt01lte, SM-T315). After the installation of Galaxy TAB 3 8.0 LTE LineageOS 14.1 ROM (lt01lte, SM-T315) you may want to enable ROOT access on your phone and here is how you can do that:
    How to Enable ROOT on LineageOS 14.1.

    Stay tuned or Subscribe to the Galaxy TAB 3 8.0 LTE (lt01lte, SM-T315) forum For other Android Nougat ROMs, LineageOS 14.1 ROMs, other ROMs and all other device specific topics.

     

    September 3, 2024 at 12:56 PM #26412

    Topic: Samsung Galaxy J7 SM-J710MN/DS

    in forum Forum for New Device Requests
    Linux User
    Participant

    Hello my dear colleagues, I would like to have a “lineage rom” for my Samsung Galaxy J7-J710MN / DS, thank you and good luck!

    September 3, 2024 at 12:56 PM #113196

    Topic: Download LineageOS 17.1 for Galaxy Note 3 T-Mobile

    in forum Galaxy NOTE 3 T-Mobile – hltetmo, SM-N900T
    Siba
    Keymaster

    Android 10 based LineageOS 17.1 for Galaxy Note 3 T-mobile is now available to download. This article explains how to install LineageOS 17.1 on Galaxy Note 3 T-mobile, with a step-by-step guide.

    This Galaxy Note 3 T-mobile LineageOS 17.1 build is brought to you by developer jprimero15. For other Android 10 based custom ROM builds you can always visit this Android 10 Download page for supported devices.

    DONATION TO DEVELOPER(S)/PROJECT:

    If you like this ROM then do consider for a contribution to jprimero15 and LineageOS project:
    – Donate to jprimero15
    – Donate to LineageOS project

    Galaxy Note 3 T Mobile lineageOS[su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]DISCLAIMER:
    THIS IS AN INITIAL BUILD. TRY AT YOUR OWN RISK.

    Installing custom ROM will delete all data on your phone. Make sure you copy all important data.
    You are the only person making changes to your phone; neither the developer nor I can be held responsible for the mistakes done by you.
    [/su_note]

    Known Issues on this LineageOS 17.1 build?

    WHAT’S WORKING:
    – Everything
    KNOWN ISSUES:
    – Unknown

    [su_note note_color=”#D8F1C6″ text_color=”#769958″ radius=”3″ class=”” id=””]

    Where to Download LineageOS 17.1 for Galaxy Note 3 T-mobile?

    [/su_note]

    How to Install LineageOS 17.1 on Galaxy Note 3 T-mobile?

    [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]
    Following are the two sub-sections of this Galaxy Note 3 T-mobile LineageOS 17.1 update guide:

    1. Installing LineageOS 17.1 for the first time
    2. Upgrading from existing LineageOS 17.1 ROM build

    [/su_note]

    First Time Installation of Galaxy Note 3 T-mobile LineageOS 17.1 –

    [su_note note_color=”#D8F1C6″ text_color=”#769958″ radius=”3″ class=”” id=””]This ROM update process requires few guides to be followed and few files to be downloaded. Everything referred in the below guide is provided in the above downloads section.[/su_note]

    1. Boot into the TWRP Recovery to install this Galaxy Note 3 T-mobile LineageOS 17.1 Android 10 based custom ROM.
      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- Make sure to have a Custom recovery like a TWRP recovery or any other custom recovery.
      – If not then download the TWRP recovery from Downloads link and follow how to install TWRP on Samsung using ODIN (it’s a generic guide which will work for TWRP as well as any other recovery)[/su_note][su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]IMPORTANT NOTE:
      Use Odin without “Auto Reboot” option to flash the TWRP.
      After flashing TWRP via Odin, manually reboot to TWRP recovery by holding the key combination of Vol UP + Home + Power.
      Don’t reboot to the stock image which restores the stock recovery.[/su_note]
    2. Wipe the data partition, Cache partition, and system partition.
      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- Here is a guide explaining how to wipe using TWRP recovery.[/su_note]
      [su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]This will delete all your data on your phone. You may consider taking a complete backup of your phone data or take a backup of all relevant partitions.
      – How to backup data on Android
      – how to take NANDROID backup using TWRP recovery[/su_note]
    3. ADB Sideload the LineageOS 17.1 zip file for Galaxy Note 3 T-mobile.
      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- Here is a post explaining how to ADB sideload using TWRP[/su_note]
    4. Once done, reboot into the TWRP recovery again.
    5. Then install the LineageOS 17.1 GApps package.
      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- Here is a post explaining how to install GApps using TWRP recovery.[/su_note]
    6. Reboot and Enjoy the Android 10 based LineageOS 17.1 for Galaxy Note 3 T-mobile.

    Upgrading from earlier LineageOS 17.1 on Galaxy Note 3 T-mobile:

    1. Boot into Recovery to flash the updated LineageOS 17.1 for Galaxy Note 3 T-mobile
    2. Wipe the system partition from the TWRP recovery menu.
    3. ADB Sideload the LineageOS 17.1 zip file.
      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- Here is a post explaining how to ADB sideload using TWRP[/su_note]
    4. Reboot and see you have the GApps and ROOT access or NOT.
      [su_note note_color=”#D8F1C6″ text_color=”#769958″ radius=”3″ class=”” id=””]- Gapps is built in such a way that it will sustain across ROM updates.[/su_note]
    5. If you don’t have GApps after upgrading the LineageOS 17.1 on your phone, then flash the GApps.
      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- Here is a post explaining how to flash GApps using TWRP recovery.[/su_note]
    6. If you don’t have ROOT after upgrading the LineageOS 17.1 on the phone, then flash the SuperSU or Magisk or the Lineage SU binary.
      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- Here is a post explaining How to ROOT LineageOS 17.1[/su_note]
    7. Once everything is done, reboot and Enjoy the LineageOS 17.1.

    [su_note note_color=”#D8F1C6″ text_color=”#769958″ radius=”3″ class=”” id=””]Complete the initial setup and enjoy Android 10 with LineageOS 17.1 on Galaxy Note 3 T-mobile.[/su_note]

    How to Root Galaxy Note 3 T-mobile on LineageOS 17.1?

    After installing LineageOS 17.1 on Galaxy Note 3 T-mobile you may want to enable ROOT access on your phone and here is how you can do that:
    – How to ROOT LineageOS 17.1

    [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]If there is no ROOT access for some reason even after installing the LineageOS SU binary, then you can try SuperSU rooting guide to enable ROOT access.[/su_note]

    GCam for LineageOS 17.1 or Android 10?

    GCam 7.0 and later versions are compatible with LineageOS 17.1 or any Android 10 ROM in general.
    You can always look into the big list of Google Camera APK download page to get a compatible GCam for your phone.

    Stay tuned or Subscribe to the Galaxy Note 3 T-mobile (t-mobile) page for other Android 10, Android Oreo ROMs, Nougat ROMs, or other ROMs and all other device specific topics.
    September 3, 2024 at 12:56 PM #10285

    Topic: Galaxy S3 Sprint CM14.1 (CyanogenMod 14.1) Nougat Custom ROM

    in forum Galaxy S3 Sprint – d2spr
    Linux User
    Participant

    Galaxy S3 Sprint CM14.1 (CyanogenMod 14.1, d2spr) Nougat ROM is an unofficial CM14.1 build. For latest updates, stay tuned to the Lineage OS device list page. In addition to this official ROM we have update many OFFICIAL CM14.1 (CyanogenMod 14.1) for many supported devices and many Unofficial CyanogenMod 14/14.1 ROM updates. This CM14.1 is for Galaxy S3 Sprint and this build is brought to you by developer javelinanddart. If you like javelinanddart’s work or this ROM then please consider a donation to Paul Keith (javelinanddart).

    CAUTION:
    This is an initial build and may have many BUGs leaving this ROM unusable as a daily driver. So, please take a backup using a synchronization application or using Samsung Smart Switch or if you have TWRP installed then boot into TWRP recovery and take a NANDROID backup using the TWRP itself before flashing this ROM. You are the only person making changes to your phone. Neither the developer nor we can be held responsible for any disaster that happens to your device.

    Status of Galaxy S3 Sprint CyanogenMod 14.1 (CM14.1) Nougat ROM:

    KNOWN ISSUES:
    – NOT KNOWN
    WHAT’S WORKING:
    – NOT KNOWN

     

    Galaxy S3 Sprint CyanogenMod 14.1 (CM14.1) Nougat ROM

    Recommended files for CM14.1 Galaxy S3 Sprint (CyanogenMod 14.1, d2spr) Nougat ROM installation:

    Root binary is inbuilt since CyanogenMod 12, so you don’t need a separate SuperSu package to install to gain ROOT access. Here is How to Enable ROOT on CM14.1/CyanogenMod 14.1

    Installing CyanogenMod 14.1 on (d2spr) Galaxy S3 Sprint CM14.1 Nougat ROM:

    Make sure that you have a custom recovery installed on your Galaxy S3 Sprint phone. If not then download the recovery from above downloads section and you can follow this TWRP recovery installation on Samsung phone using ODIN guide.

    1. Follow this if you are flashing CyanogenMod 14.1 ROM for the first time to your Galaxy S3 Sprint phone, or coming from another ROM:

      This will delete all your data on your phone. You may consider backing up your phone data or take a nandroid backup. Here is how to take NANDROID backup using TWRP recovery.

      Points to NOTE on BACKUP:
      – Try to avoid restoring apps backup using Titanium Backup. It may break things up.
      – Don’t restore system data using Titanium Backup! It will definitely break the current installation.
      – It is also discouraged to Restoring Apps + Data using Titanium Backup.

    2. Upgrading from earlier version of CyanogenMod 14.1 ROM on Galaxy S3 Sprint:

    Complete the initial setup and enjoy Android Nougat 7.1 with CyanogenMod 14.1 for Galaxy S3 Sprint. After this CM14.1 installation you may want to enable ROOT access on your phone and here is how you can do that:
    How to Enable ROOT Access on CM14.1/CyanogenMod 14.1

    Stay tuned or Subscribe to the Samsung Galaxy S3 Sprint (d2spr) forum For upcoming Android Nougat ROMs, CyanogenMod Custom ROMs, other ROMs and all other device specific topics.

     

    September 3, 2024 at 12:56 PM #31277

    Topic: LineageOS 15.1 for Galaxy J7 2016 Exynos – Android Oreo Download

    in forum Galaxy J7 2016 Exynos (j7xelte)
    Linux User
    Participant

    Android Oreo 8.1 ROM, LineageOS 15.1 for Galaxy J7 2016 Exynos (j7xelte) has now arrived via a development build. This LineageOS 15.1 for Galaxy J7 2016 Exynos (j7xelte) is brought to you by developer Abhayruparel.

    DONATION TO DEVELOPER:

    If you like this ROM then do consider for a small contribution to Abhayruparel and/or LineageOS project:
    – Donate to LineageOS project
    – No donation found for Abhayruparel.

    If you want the OFFICIAL LineageOS update or some more Android Oreo ROMs then stay tuned to the LineageOS 15 page or the AOSP Android Oreo devices list page or the AICP 13 Oreo ROMs list.

    DISCLAIMER:
    THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL OR EVEN IF IT BOOTS IT MAY HAVE MANY BUGS. HAVE A BACKUP BEFORE FLASHING THIS LINEAGEOS ROM AND TRY AT YOUR OWN RISK. Installing a custom ROM on a Galaxy J7 2016 Exynos (j7xelte) requires the bootloader to be unlocked on the Galaxy J7 2016 Exynos (j7xelte) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

     

    Content structure:

    1. Status of LineageOS 15.1 for Galaxy J7 2016 Exynos
    2. Required Downloads of LineageOS 15.1 ROM for Galaxy J7 2016 Exynos
    3. Installing LineageOS 15.1 on Galaxy J7 2016 Exynos

    4. Rooting the LineageOS 15.1 ROM on Galaxy J7 2016 Exynos

     

    Status of LineageOS 15.1 for Galaxy J7 2016 Exynos Oreo ROM Download:

    WHAT’S WORKING:
    – Unknown
    KNOWN ISSUES:
    – Unknown

     

    LineageOS 15.1 for Galaxy J7 2016 Exynos Oreo ROM Download

    REQUIRED LINKS AND FILES FOR LineageOS 15.1 for Galaxy J7 2016 Exynos OREO CUSTOM ROM:

    Root binary is NOT inbuilt in LineageOS 15.1, so you may need a separate SuperSu package or LineageOS su binary to install to gain ROOT access. Here is LineageOS Rooting guide
    If there is no in-built ROOT or it does not work for some reason then you can try SuperSU rooting guide to enable ROOT access.

    HOW TO INSTALL/DOWNLOAD/FLASH/UPDATE LineageOS 15.1 FOR Galaxy J7 2016 Exynos OREO CUSTOM ROM:

    1. Follow this if you are flashing LineageOS 15.1 for Galaxy J7 2016 Exynos for the first time, or coming from another ROM:

      Points to NOTE:
      – Try to avoid restoring apps backup using Titanium Backup. It may break things up.
      – Don’t restore system data using Titanium Backup! It will definitely break the current installation.
      – It is also discouraged to Restoring Apps + Data using Titanium Backup.

    2. Upgrading from earlier version of LineageOS 15.1 for Galaxy J7 2016 Exynos (j7xelte):

    Complete the initial setup and enjoy Android Oreo 8.1 with LineageOS 15.1 for Galaxy J7 2016 Exynos. After the installation of LineageOS 15.1 for Galaxy J7 2016 Exynos you may want to enable ROOT access on your phone and here is how you can do that:
    How to Enable ROOT on LineageOS 15.1.

     

    Stay tuned or Subscribe to the Galaxy J7 2016 Exynos LineageOS forum For other Android Oreo, Nougat ROMs, LineageOS 15.1 ROMs, other ROMs and all other device specific topics.

     

    September 3, 2024 at 12:56 PM #3374

    Topic: MiFlash Tool Download and MIUI Fastboot Stock ROM / FW Flash Guide

    in forum Xiaomi Generic
    Linux User
    Participant

    MiFlash Tool is a MIUI firmware flashing tool for Xiaomi devices. This is a firmware flashing Utility like the Samsung’s Odin and LG’s LG UP Flash Tool and supports all latest Xiaomi devices.

    In this article you will find MiFlash tool download link and a simple guide on how to install MIUI stock ROM or stock firmware on any Xiaomi phone.

    Xiaomi MiFlash Tools Download Link

    More About Xiaomi’s MiFlah tool

    Not to be confused with the MiFlash Unlock tool which is used to Unlock bootloader of a Xiaomi phone.

    MiFlash tool is used to flash based stock MIUI firmware on Xiaomi phones. Any MIUI firmware is available in recovery flashable and fastboot flashable format. The MiFlash tool is used to flash the fastboot MUI stock ROMs.

    Key Features of MiFlash Tool

    1. Able to flash Fastboot MIUI ROM
    2. Built in drivers
    3. Built in fastboot utility so no need to install it separately and execute commands manually.
    4. It re-locks the bootloader

    Where to Download MiFlash Tool?

    [su_note note_color=”#D8F1C6″ text_color=”#769958″ radius=”3″ class=”” id=””]
    Below is a direct link to download MiFlash Tool for Windows PC. As of now there are many versions of the tool is available to download.
    Select the drop down box in the download page to select which version to download.

    [su_button url=”https://cyanogenmods.org/downloads/miflash-tool-for-windows/” target=”self” style=”default” background=”#167C80″ color=”#FFFFFF” size=”5″ wide=”no” center=”no” radius=”auto” icon=”” icon_color=”#FFFFFF” text_shadow=”none” desc=”” download=”” onclick=”” rel=”” title=”” id=”” class=””]MiFlash Download for Windows[/su_button]
    [/su_note]

    How to Install MIUI Fastboot ROM using MiFlash Tool?

    [su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]Flashing a MIUI ROM using the MiFlash tool requires an unlocked bootloader of a Xiaomi phone.

    Unlocking the bootloader may void the warranty and delete all user data.[/su_note]

    1. Download and extract the MiFlash Tool zip file.
    2. Download the device specific MIUI Fastboot ROM from our MIUI Downloads section and extract the files.

      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]The MIUI fastboot stock firmware file will be in “.tgz” file extension. If not, convert it to .tgz.[/su_note]

      After extracting the files, the content in the directory should look like this:
      MIUI fastboot ROM files

    3. Put your phone/tablet into fastboot mode.

      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Turn off the phone and then press and hold the Power button and the Volume Down button to boot into the fastboot mode.[/su_note]

    4. Open the MiFlash utility, Click on Select button and then browse and select the directory link where you have extracted the MIUI Fastboot ROM files.

      Select Refresh and then Flash on MiFlash Tool

    5. First click on the Refresh button, which should automatically recognize your Xiaomi device.
    6. Now click on the Flash button on the MiFlash utility. Once the flashing process is done, you will see a Success note on the MiFlash Tool.

      MIUI ROM Flashing Success on MiFlash Tool

    The Update process will start automatically. Wait until the Status bar shows “The operation completed successfully”, which means the ROM has been successfully installed on your Xiaomi device. After that your Xiaomi phone/tabletshould automatically boot to the new version.

    That’s all for now. If you have downloaded this MiFlash tool then install the application and then go back and complete your bootloader unlock or Xiaomi stock ROM flashing or complete wherever you left off.

    September 3, 2024 at 12:56 PM #3630

    Topic: How to Get Phone Info on a Samsung Phone

    in forum Common Samsung Topics
    Linux User
    Participant

    Sometimes you may need to know the Phone INFO on your Samsung phone for several reasons. To download a Stock Samsung Firmware you need to have PDA version, CPC info, Model info etc. Developer vndnguyen has developer a simple one click Android App that helps you getting all those info that you need.

    Using this Samsung Phone Info app you can know exactly what country your phone has been produced for. So you can choose the correct firmare to flash. You can also know your Bootloader version so you can decide which method to use to root your Samsung device, whether the Knox will be tripped or not, which firmware version can be flashed and many such question can be answered easily. Certainly not easily and definitely you have to look around the web but definitely it will give you enough information to move on in the right direction.

    Samsung Phone Info Android App

    Below are the SAMSUNG SPECIFIC INFO that this Samsung Phone Info App can report:

    • Phone Colour
    • CSC Product Code
    • CSC Sales Code
    • Country Region
    • RIL Serial Number
    • PDA Version
    • CSC Version
    • Changelist
    • Country of Origin
    • Phone Manufacturing Date
    • Knox Warranty Void

    Below are some other INFO reported by this APP Samsung Phone Info:

    • Manufacturer, Phone Model, Device Name & Product Name
    • IMEI and Serial No
    • Bootloader Version & Baseband Version
    • Kernel Version
    • Build Number, Description and Date
    • Fingerprint
    • Android Version
    • Mobile Operator Name/Mobile Network Code
    • Total RAM, Screen size and resolution, Battery capacity and health

    Phone INFO ★Samsung★ is the Android Application which is available to be downloaded from the Android Play Store. have a look below for the Download link.

    DOWNLOAD LINK:
    Phone Info for Samsung @ Google Play Store

    September 3, 2024 at 12:56 PM #3886

    Topic: Installing Galaxy S6 Edge Plus CM13 Marshmallow Custom ROM

    in forum Galaxy S6 Edge Plus – G928xx
    Linux User
    Participant

    Galaxy S6 Edge Plus CM13 (CyanogenMod 13) Marshmallow Custom ROM has been arrived which is brought to you by developer Rainbow_Dash. If you are flashing CyanogenMod for the first time then please be aware that this MAY VOID WARRANTY of your phone and may permanently damage your phone if not handled this guide properly. This Galaxy S6 Edge Plus CM13 CyanogenMod Marshmallow ROM is ONLY for Galaxy S6 Edge Plus and hence make sure on which device you are flashing.

    This is an ALPHA build and many things does not work. This is just an early build to see how the CM13 runs on S6 Edge Plus (at least for now). Make sure to have a look on the NOT WORKING section.

    DISCLAIMER:
    Installing Custom ROM requires your phone to be UNLOCKED in some cases which may VOID WARRANTY. Sometimes if not handled carefully then it may permanently damage your phone and prevent from BOOT. Understand that you are the only person making changes to the device. In case of any damage or any kind of loss as a consequence of this installation, Neither the Developer nor We can be held responsible.

     

    NOT WORKING:

    • Camera is BUGGY.
    • Back and Recents soft button does not work (on the display).
    • Fingerprint Sensor does not work.
    • Notification drawer is BUGGY.
    • Sound & Mic quality is not good.

     

    Galaxy S6 Edge Plus CM13 CyanogenMod 13 Marshmallow Custom ROM

    Required Downloads and Links for Galaxy S6 Edge Plus CM13 unofficial ROM flashing:

    • Galaxy S6 Edge Plus TWRP recovery download link.
      – Download the .tar.md5 extension TWRP file for YOUR DEVICE ONLY which can be flashed with ODIN. Follow this guide: How to Install TWRP on Samsung using Odin for the .tar.md5 TWRP file.

      – If you already have an unlocked bootloader then you can download the .img file extension. Then follow this guide: How to flash TWRP using fastboot.

    • Galaxy S6 Edge Plus CyanogenMod 13 ROM Download link
    • NO working GApps found yet. Link will be updated here when one will be found.

    Root binary is inbuilt since CyanogenMod 12, so you don’t need a separate SuperSu package to install to gain ROOT access. Here is How to Enable ROOT Access on CM13/CyanogenMod 13

    Flashing Galaxy S6 Edge Plus CM13 CyanogenMod 13 Marshmallow Custom ROM:

    1. Follow this if you are flashing CyanogenMod 13 for the first time to your Galaxy S6 Edge Plus, or coming from another ROM:

      • Install the TWRP recovery for the Galaxy S6 Edge Plus.
        If you don’t have a recovery then download it from the above link and follow the beolw guide to flash:
        – How to Install TWRP on Samsung using Odin for the .tar TWRP file.
      • Then download and Copy the GApps and CyanogenMod ROM ZIP to your device.
      • Boot into Recovery. Make sure to have a Custom recovery like CWM or TWRP.
      • Wipe data factory reset, Cache partition, Dalvik Cache and Format the System partition. Here is a guide explaining how to wipe data using TWRP recovery.
      • First flash the CM ROM ZIP from device. Then flash the GApps zip from your device memory.
        – Here is a post explaining how to flash a custom ROM using TWRP recovery.
        Use the same guide to flash the GApps too.
      • Reboot and Enjoy the CyanogenMod 13 Marshmallow ROM on your Galaxy S6 Edge Plus.

      2. This will delete all your data on your phone. You may consider backing up your phone data or take a nandroid backup. Here is how to take NANDROID backup using TWRP recovery.

      Points to NOTE:
      – Try to avoid restoring apps backup using Titanium Backup. It may break things up.
      – Don’t restore system data using Titanium Backup! It will definitely break the current installation.
      – It is also discouraged to Restoring Apps + Data using Titanium Backup.

    2. Upgrading from earlier version of CyanogenMod 13.0:

    The first boot may take long time, so don’t panic and be sure that you have enough battery backup. Let the phone reboot and then enjoy the official CyanogenMod 13 Marshmallow ROM on Galaxy S6 Edge Plus.

    After this CM13 installation you may want to enable ROOT access on your phone and here is how you can do that:
    How to Enable ROOT Access on CM13/CyanogenMod 13.

    DevThread

  • Author
    Search Results
Viewing 10 results - 91 through 100 (of 641 total)
1 2 3 … 9 10 11 … 63 64 65