Search Results for 'MEDIATEK'

[Siba]

TWRP for Oukitel C11 Pro is now available from an unofficial build and this post guides you how to install TWRP for Oukitel C11 Pro and ROOT Oukitel C11 Pro (using TWRP recovery).

This TWRP download for Oukitel C11 Pro is brought to you by developer(s) andrey.medwe

[su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]DISCLAIMER:
THIS IS AN UNOFFICIALLY BUILD TWRP FOR Oukitel C11 Pro. FLASH AT YOUR OWN RISK.
INSTALLING THE TWRP RECOVERY AND ROOT Oukitel C11 Pro NEEDS AN UNLOCK BOOTLOADER ON YOUR PHONE.
DURING THE BOOTLOADER UNLOCK PROCESS ALL THE PHONE DATA WILL BE ERASED.
 

ROOTING Oukitel C11 Pro MAY BRICK THE PHONE.
MAKE SURE YOU READ THE ADVANTAGES AND DISADVANTAGES OF ROOTING BEFORE YOU PROCEED FURTHER.
Before proceeding further you may consider backup all data on the phone.
You are the only person making changes to your phone and I cannot be held responsible for the mistakes done by you.
[/su_note]
 

 

Content structure:

1. Required downloads to install TWRP recovery for Oukitel C11 Pro
2. How to install TWRP recovery on Oukitel C11 Pro
3. What you can do after installing TWRP on Oukitel C11 Pro
4. Required downloads and guides for Oukitel C11 Pro ROOT
5. Step-by-Step guide on Oukitel C11 Pro ROOTING guide
6. How to check if Oukitel C11 Pro is ROOTED or NOT

DOWNLOAD LINK OF TWRP FOR Oukitel C11 Pro, OTHER DOWNLOADS AND REQUIRED GUIDES:

• Unlocked bootloader on Oukitel C11 Pro
• USB drivers for Mediatek
• 15 Seconds ADB Installer or Minimal ADB and Fastboot for Windows
• Latest MTK Droid Root and tools
• Latest MTK SP Flash Tool for Windows

 

REQUIRED DOWNLOADS IF YOU ARE USING A LINUX PC:

• Install ADB and fastboot on Linux PC
• Latest MTK SP Flash Tool for Linux 64-bit
• Latest MTK SP Flash Tool for Linux 32-bit
• TWRP recovery download for Oukitel C11 Pro

 

STEP BY STEP GUIDE OF HOW TO INSTALL TWRP FOR Oukitel C11 Pro:

 

Follow the below step by step guide to install the TWRP for Oukitel C11 Pro

Before installing TWRP you may require an unlocked bootloader on Oukitel C11 Pro.

Installing TWRP on Oukitel C11 Pro requires a scatter file to be created.
A scatter file of a Mediatek device is what tells about the presence of different partition and the start address of each partition.

How to create scatter file for Oukitel C11 Pro:

This guide need the Droid MTK Tool. With the help of Droid MTK Tool we will create the scatter file for Oukitel C11 Pro.

1. Download the Droid MTK Tool from the above Downloads section.
2. It’s in a zip file, so extract that file or open using WinRar or some application and then open the MTKDroidTools.exe file.

   

3. Enable USB Debugging under Developer Options on the Oukitel C11 Pro; to make the device accessible via ADB.

   – If you don’t know how to do this then here is How to Enable Developer Options and How to Enable USB Debugging and OEM unlock.

4. Then connect the phone using the USB cable to the PC.

   – When you connect the phone to the PC, MTKDroidTool will show all the information about your phone.

   

5. On the below portion of the screen you will see a Blocks Map button. Click on the button
6. On the next screen you have all the partition information and starting address of all the partitions of Oukitel C11 Pro.
   On the bottom of the screen you see a Create scatter file button.

   – Click on the button to create scatter file for Oukitel C11 Pro.

   

7. Save the scatter file for Oukitel C11 Pro in a location which you can remember and access easily.

Now Install TWRP on Oukitel C11 Pro using SP Flash Tool:

TWRP recovery download to a Mediatek phone is done by SP Flash tool, which uses a scatter file to know which address the recovery partition starts.
Make sure you have downloaded the SP Flash tool and created the scatter file for Oukitel C11 Pro.

Follow the below steps to install the TWRP on Oukitel C11 Pro using the scatter file.

1. Open the SP Flash tool zip file and then open the flash_tool.exe file.
2. Click browse on the the scatter-loading file section and select the Oukitel C11 Pro scatter file you created earlier using the MTKDroid Tool.

   After selecting the scatter file, the SP Flash tool application automatically find available partitions and other details.

   

3. Now select the location next to the Recovery partition and select the TWRP for Oukitel C11 Pro, which is in .img format.

   

4. Then click on the Download button to start downloading/flashing of the TWRP recovery on Oukitel C11 Pro as shown in the picture.

   

5. After clicking on the download button you will see a red bar on the bottom followed by a yellow bar.
   When the TWRP is downloaded to Oukitel C11 Pro, the SP Flash tool will alert you saying Download is done.

That’s all.

What to do after you install TWRP for Oukitel C11 Pro:

• You can root the Oukitel C11 Pro
• You can install one of the custom ROMs available for Oukitel C11 Pro
• You can install some of the mods available on Oukitel C11 Pro

Well, this isn’t it. You can install customized themes, sound mods, Xposed modules etc. after installing the TWRP for Oukitel C11 Pro.
TWRP recovery is the gateway to many goodies for your phone.

Now, if you want to ROOT Oukitel C11 Pro then below is a step-by-step by guide for the same.

REQUIRED DOWNLOADS OR GUIDES FOR Oukitel C11 Pro ROOTING:

• Make sure you have already unlocked the bootloader and installed TWRP for Oukitel C11 Pro
   

  – Well, this is a very important aspect of this SuperSU ROOT process. The SuperSU zip file is developed in a way to be installed via a TWRP recovery or other custom recovery. Stock recovery may not be able install this SuperSU or Magisk ROOT zip file.

• Download the latest SuprSU ROOT for Oukitel C11 Pro or one of the following:
  • Download link for Latest SuperSU zip file
  • Download link for STABLE SuperSU zip file
  • Download link for SuperSU BETA zip file
  • Download link to SuperSU APK Free version
  • Download link to SuperSU APK Pro version
  • Download link to Magisk ROOT zip file

 

IMPORTANT NOTE:

• Your phone will not be rooted just by installing the SuperSU APK file on your Android phone.
• SuperSU APK Free or Pro version is just a SuperSU ROOT management application.
• The SuperSU APK Free or Pro app will ONLY work if you have already ROOTED your Android Phone.

 

Step-by-Step guide on how to ROOT Oukitel C11 Pro using SuperSU or Magisk zip file:

 

1. Download and copy the SuperSU or Magisk ROOT file to Oukitel C11 Pro. (I hope you have already downloaded the SuperSU zip file from the above downloads section)
2. Now restart the Oukitel C11 Pro to boot into TWRP recovery.
3. Then, Select the Install from TWRP home screen, then select the SuperSU ROOT zip file from the file browser.
4. Flash or install the SuperSU or Magisk for Oukitel C11 Pro, by Sliding the Swipe to Confirm Flash on TWRP screen.
5. Wait for TWRP to flash the SuperSU or the Magisk. Once the flashing is done just reboot your device.
6. Profit!!! You should now have a Oukitel C11 Pro ROOT enabled phone.

How to check if ROOT is enabled on Oukitel C11 Pro or NOT?

Install the ROOT checker app from the Play Store and verify if your phone is ROOTED or not.

Here is a screenshot how to flash the SuperSU ROOT binary via TWRP:
 

If you face any problems on this guide to install TWRP for Oukitel C11 Pro then, you can login and reply here. Either me or some other user on this forum will revert back to your query as soon as possible.

Stay tuned or Subscribe to the Oukitel C11 Pro forum For other Android Custom ROMs, LineageOS ROMs, and all other device specific topics.

 

[Linux User]

Stock ROM or stock Firmware for Tiitan T41 is now available to download. Here is how to flash stock firmware on Tiitan T41 using Mediatek SP Flash Tool.

Although I will make a very clean beginner’s step by step guide, but it is also advisable for you to go through all the steps in detail, so that you understand what are you doing.

 

[su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]
DISCLAIMER:
THIS STOCK ROM FLASHING IS ONLY FOR Tiitan T41 WHICH IS MEDIATEK MT6739 CHIPSET BASED DEVICE.
DON’T TRY TO FLASH ON OTHER MT6739 BASED DEVICES OR ANY OTHER DEVICE TYPE.
[/su_note]

[su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]FLASHING A STOCK ROM ON Tiitan T41 WILL DELETE ALL DATA.
– IT ALWAYS A GOOD IDEA TO KEEP A BACKUP OF ALL DATA SUCH AS: SMS, PHONE CALL, CONTACT, MUSIC, IMAGES, etc.
– ALSO BACKUP THE IMEI AND NVRAM DATA OF YOUR PHONE.
[/su_note]

Required Guides and Downloads to Install Stock ROM/Firmware on Tiitan T41:

• Mediatek VCOM Driver
• SP Flash Tool
• ROM Download link of stock firmware for Tiitan T41
• Install stock ROM using SP Flash Tool

 

Why to flash Stock Firmware/ROM on Tiitan T41:

There could be various reasons why you may want to flash a stock firmware on Tiitan T41 to make it a new like phone. Following are some of the key benefits you get by flashing a stock firmware on Tiitan T41:

• Flashing a stock ROM on Tiitan T41 will make the phone new like at least from software point of view.
• If your phone has become too slow or lagging in performance after a prolonged period of usage, then installing a stock ROM/firmware may bring back the speed.
• If you have rooted your Android phone, then flashing a stock ROM will help you to restore your phone software to original state.

  [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Sometimes software factory reset from Android settings does not help you get rid of ROOT.
  In that case, you must flash a stock Firmware to bring back the phone to original state.[/su_note]

• Phone warranty will be VOID if you have ROOT on Android phone or have a custom ROM on Android phone. Flashing a stock Firmware/ROM will bring back the software to original state and will restore your warranty.

 

How to Flash Stock Fimrware / ROM on Tiitan T41 using Mediatek SP Flash Tool:

1. Download and extract the Tiitan T41 stock firmware files.
2. Download and install the VCOM driver on your PC.

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]VCOM driver is required for the SP Flash Tool to recognize your Tiitan T41 Phone to be able to download stock Fimrmware.[/su_note]

3. Download and extract the Mediatek SP Flash Tool zip file.
4. Go to the extracted SP Flash Tool folder and open the flash_tool.exe file, which is the actual SP Flash Tool application.

   See the below screenshot:
   

5. By default the SP Flash Tool would have opened with the Download Tab open. If not then click on the Download Tab and then click on the choose button to load the Tiitan T41 stock ROM scatter file.

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- You will find a scatter file with a name of somewhat MT6739_Android_scatter.txt in the Tiitan T41 stock firmware package.
   – This scatter file contains all the partition information of Tiitan T41 Mediatek phone and which binary file to flash on a which partition and address.[/su_note]

   See the screenshot below:
   

6. After that a file browser will be opened to find and select the Tiitan T41 stock ROM scatter file.
   Go to the Tiitan T41 stock firmware folder where you have extracted, select the Scatter file (somewhat MT6739_Android_scatter.txt) from there and click on Open.

   See the screenshot below:
   

7. After loading the scatter file, click on the Download button to start downloading the stock firmware to Tiitan T41.

   [su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]Firmware download does not start just by clicking the Download button. You need to connect the phone in download mode, which we will be doing that in the later step.[/su_note]

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- SP Flash Tool automatically takes all the information and will show you the details of partition and binary file information. Verify all the details before start flashing the stock ROM or the stock firmware on your Mediatek phone.
   – Verify the download mode before flashing (marked by number 1 in the screenshot).
   – Verify which all partitions are being flashed (marked by number 2 in the screenshot). MAKE SURE THERE IS NO NVRAM OR IMEI PARTITION SELECTED HERE.[/su_note]

   See the screenshot below:
   

8. Now turn off your Mediatek Phone and wait for few seconds.
   Then you hold both the volume up and Volume Down button and connect the phone PC using a USB cable.

   – You see in the SP Flash tool, it will start downloading the firmware to the Mediatek Phone automatically.

9. After the stock ROM is flashed successfully on Tiitan T41, you will see a Download OK confirmation on SP Flash Tool.

   See the screenshot below:
   

After being successfully install stock firmware or the stock ROM on Tiitan T41, you can disconnect the phone and restart if it does not restart automatically.

If you face any problem installing the stock firmware on Tiitan T41 using SP Flash Tool, then leave a reply on this thread. I will reply back as early as possible.

[su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Stay tuned or Subscribe to the Tiitan T41 forum for recovery, rooting, custom ROM guides etc. and all other device specific topics.[/su_note]

[Siba]

TWRP for Elephone U is now available to download from TWRP builder as an unofficial build and this post guides you how to install TWRP on Elephone U and ROOT Elephone U (using TWRP recovery).

After installing TWRP recovery on Elephone U you can install many android mods such as google camera (gcam) apk, enable navigation gesture, enable face unlock, viper4android audio enhancement etc. and many more.

[su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]DISCLAIMER:
THIS IS AN UNOFFICIALLY BUILD TWRP FOR Elephone U. FLASH AT YOUR OWN RISK.
INSTALLING THE TWRP RECOVERY AND ROOT Elephone U NEEDS AN UNLOCK BOOTLOADER ON YOUR PHONE.
DURING THE BOOTLOADER UNLOCK PROCESS ALL THE PHONE DATA WILL BE ERASED. MAKE SURE TO BACKUP EVERYTHING.
[/su_note]
 

 

Content structure:

1. Required downloads to install TWRP recovery for Elephone U
2. How to install TWRP recovery on Elephone U
3. What you can do after installing TWRP on Elephone U
4. Required downloads and guides for Elephone U ROOT
5. Step-by-Step guide on Elephone U ROOTING guide
6. How to check if Elephone U is ROOTED or NOT

DOWNLOAD LINK OF TWRP FOR Elephone U, OTHER DOWNLOADS AND REQUIRED GUIDES:

• Unlock bootloader on Elephone U
• TWRP recovery download for Elephone U
• Force Encryption disabler download

 

REQUIRED DOWNLOADS IF YOU ARE USING A WINDOWS PC:

• USB drivers for Mediatek
• ADB and Fastboot download
  – 15 Seconds ADB Installer for Windows
  – Minimal ADB and Fastboot for Windows
• Latest MTK Droid Root and tools
• Latest MTK SP Flash Tool for Windows

 

REQUIRED DOWNLOADS IF YOU ARE USING A LINUX PC:

• Install ADB and fastboot on Linux PC
• Latest MTK SP Flash Tool for Linux 64-bit
• Latest MTK SP Flash Tool for Linux 32-bit

 

STEP BY STEP GUIDE OF HOW TO INSTALL TWRP FOR Elephone U:

 

Follow the below step by step guide to install the TWRP for Elephone U

Before installing TWRP you may require an unlocked bootloader on Elephone U.

Installing TWRP on Elephone U requires a scatter file to be created.
A scatter file of a Mediatek device is what tells about the presence of different partition and the start address of each partition.

[su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]
Either you can download the scatter file from the downloads section or you can create it by yourself using the following guide.
[/su_note]

How to create scatter file for Elephone U:

Extract the scatter file for Elephone U from the TWRP file, which is available in the download link.
If you already have a scatter file then there is no need to create it. You can SKIP to install the TWRP directly.

If you don’t have a scatter file for the Elephone U then you need to create it by yourself by following the below steps.

This guide needs the Droid MTK Tool. With the help of Droid MTK Tool we will create the scatter file for Elephone U.

1. Download the Droid MTK Tool from the above Downloads section.
2. It’s in a zip file, so extract that file or open using WinRar or some application and then open the MTKDroidTools.exe file.

   

3. Enable USB Debugging under Developer Options on the Elephone U; to make the device accessible via ADB.

   – If you don’t know how to do this then here is How to Enable Developer Options and How to Enable USB Debugging and OEM unlock.

4. Then connect the phone using the USB cable to the PC.

   – When you connect the phone to the PC, MTKDroidTool will show all the information about your phone.

   

5. On the below portion of the screen you will see a Blocks Map button. Click on the button
6. On the next screen you have all the partition information and starting address of all the partitions of Elephone U.
   On the bottom of the screen you see a Create scatter file button.

   – Click on the button to create scatter file for Elephone U.

   

7. Save the scatter file for Elephone U in a location which you can remember and access easily.

Now Install TWRP on Elephone U using SP Flash Tool:

TWRP recovery download to a Mediatek phone is done by SP Flash tool, which uses a scatter file to know which address the recovery partition starts.
Make sure you have downloaded the SP Flash tool and created the scatter file for Elephone U.

Follow the below steps to install the TWRP on Elephone U using the scatter file.

1. Open the SP Flash tool zip file and then open the flash_tool.exe file.
2. Click browse on the the scatter-loading file section and select the Elephone U scatter file you created earlier using the MTKDroid Tool.

   After selecting the scatter file, the SP Flash tool application automatically find available partitions and other details.

   

3. Now select the location next to the Recovery partition and select the TWRP for Elephone U, which is in .img format.

   

4. Then click on the Download button to start downloading/flashing of the TWRP recovery on Elephone U as shown in the picture.

   

5. After clicking on the download button you will see a red bar on the bottom followed by a yellow bar.
   When the TWRP is downloaded to Elephone U, the SP Flash tool will alert you saying Download is done.
6. One the TWRP is flashed, start your phone in TWRP mode.
   When the phone is booting press and hold the volume + button to enter into TWRP recovery.

   [su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]IT IS IMPORTANT THAT YOU REBOOT INTO RECOVERY AND DISABLE FORCE ENCRYPTION BEFORE BOOTING INTO SYSTEM OR STARTING THE PHONE. IF NOT DONE THE TWRP WILL BE REPLACED BY STOCK RECOVERY.[/su_note]

7. From TWRP, disable encryption and flash the Disable Force Encryption zip file

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- Format data partition from TWRP to disable Encryption to be able to use the data partition.
   – Then you flash the Disable Force Encryption zip file so that the system will not encrypt it again.[/su_note]

That’s all.

What to do after you install TWRP for Elephone U:

• You can root the Elephone U
• You can install one of the custom ROMs available for Elephone U
• You can install some of the mods available on Elephone U

Well, this isn’t it. You can install customized themes, sound mods, Xposed modules etc. after installing the TWRP for Elephone U.
TWRP recovery is the gateway to many goodies for your phone.

Now, if you want to ROOT Elephone U then below is a step-by-step by guide for the same.

 

[su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]
ROOTING Elephone U MAY BRICK THE PHONE.
MAKE SURE YOU READ THE ADVANTAGES AND DISADVANTAGES OF ROOTING BEFORE YOU PROCEED FURTHER.
Before proceeding further you may consider backup all data on the phone.
You are the only person making changes to your phone and I cannot be held responsible for the mistakes done by you.
[/su_note]

REQUIRED DOWNLOADS OR GUIDES FOR Elephone U ROOTING:

• Make sure you have already unlocked the bootloader and installed TWRP for Elephone U
   

  – Well, this is a very important aspect to ROOT using Magisk zip file. The Magisk ROOT zip file is developed in a way to be installed via a TWRP recovery or other custom recovery. Stock recovery may not be able install this SuperSU or Magisk ROOT zip file.

• Download the latest Magisk ROOT zip file for Elephone U or one of the following:
  • Download link to Magisk ROOT zip file (RECOMMENDED)
• Download the latest SuperSU ROOT zip file for ONLY if the Magisk does not work:
  • Download link for Latest SuperSU ROOT zip file
  • Download link for STABLE SuperSU ROOT zip file
  • Download link for SuperSU BETA ROOT zip file
  • Download link to SuperSU APK Free version
  • Download link to SuperSU APK Pro version

 

IMPORTANT NOTE:

• Your phone will not be rooted just by installing the SuperSU APK file on your Android phone.
• SuperSU APK Free or Pro version is just a SuperSU ROOT management application.
• The SuperSU APK Free or Pro app will ONLY work if you have already ROOTED your Android Phone.

 

Step-by-Step guide on how to ROOT Elephone U using SuperSU or Magisk ROOT zip file:

 

1. Download and copy the Magisk ROOT file to Elephone U. (I hope you have already downloaded the files from the above downloads section)
2. Restart the Elephone U to boot into TWRP recovery.
3. From the TWRP recovery screen, click the Install button, then select the Magisk ROOT zip file from the file browser.
4. Flash or install the SuperSU or Magisk for Elephone U, by Sliding the Swipe to Confirm Flash on TWRP screen.
5. Wait for TWRP to flash the Magisk or SuperSU ROOT file. Once the flashing is done just reboot your device.
6. Profit!!! You should now have a Elephone U ROOT enabled phone.

How to check if ROOT is enabled on Elephone U or NOT?

Install the ROOT checker app from the Play Store and verify if your phone is ROOTED or not.

Here is a screenshot how to flash the SuperSU ROOT binary via TWRP:
 

If you face any problems on this guide to install TWRP for Elephone U then, you can login and reply here. Either me or some other user on this forum will revert back to your query as soon as possible.

Stay tuned or Subscribe to the Elephone U forum For other Android Custom ROMs, LineageOS ROMs, and all other device specific topics.

 

[Linux User]

Resurrection Remix Oreo for Moto E4 Plus is now available to download via an UNOFFICIAL version. This RR Oreo for Moto E4 Plus (nicklaus) is brought to you by developer SamarV-121.

DONATION TO DEVELOPER(s):

If you like this ROM then do consider a small contribution to SamarV-121 and/or the Resurrection Remix OS project:
– No donation link found for SamarV-121
– Donate to Resurrection Remix OS project

If you want the OFFICIAL Resurrection Remix update or some more Android Oreo Custom ROMs then stay tuned to one of the following list:
– Resurrection Remix Oreo Download list of devices
– LineageOS 15 ROM
– OFFICIAL LineageOS 15.1 Download
– AOSP Oreo ROMs Download devices list page.

DISCLAIMER:
THIS IS AN INITIAL BUILD OF RESURRECTION REMIX ANDROID OREO (8.1), WHICH MAY HAVE MANY BUGS. BACKUP THE CURRENT ROM BEFORE FLASHING. TRY AT YOUR OWN RISK.
Installing a custom ROM on a the Moto E4 Plus requires an unlock bootloader for Moto E4 Plus Mediatek device and a custom recovery to be installed, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person making changes to your phone and I cannot be held responsible for the mistakes done by you.

 

Content structure:

1. Status of Resurrection Remix Android 8.1 Oreo ROM for Moto E4 Plus
2. Required Downloads of Resurrection Remix Android 8.1 Oreo ROM for Moto E4 Plus
3. How to Install Resurrection Remix Oreo for Moto E4 Plus
   • How to Install Resurrection Remix Oreo for Moto E4 Plus for the first time
   • How to Upgrade Moto E4 Plus from existing Resurrection Remix Android 8.1 Oreo ROM
4. Rooting the Resurrection Remix Oreo ROM on Moto E4 Plus

 

Status of Resurrection Remix Oreo for Moto E4 Plus:

WHAT’S WORKING:
– Unknown

KNOWN ISSUES:
– Unknown

 

REQUIRED DOWNLOADS AND LINKS TO UPDATE Moto E4 Plus RR OREO (RESURRECTION REMIX) ROM:

• TWRP recovery download for Moto E4 Plus for RR Oreo ROM

  – Follow this guide to install TWRP: Install TWRP recovery on Mediatek device (This requires an unlocked bootloader)
  – Here is How to unlock bootloader for Moto E4 Plus Mediatek Device

• ROM Download link to Resurrection Remix Oreo for Moto E4 Plus
• Oreo GApps Download Link for Moto E4 Plus Resurrection Remix Oreo ROM
• Rooting guide for RR Oreo

HOW TO INSTALL/FLASH/UPDATE RESURRECTION REMIX OREO FOR Moto E4 Plus (ANDROID ANDROID 8.1, RR v6.0.0 ROM):

Follow this to Install RR Oreo for Moto E4 Plus for the first time or coming from another Android ROM:

Points to NOTE on BACKUP before updating:
– Try to avoid restoring apps backup using Titanium Backup. It may break things up.
– Don’t restore system data using Titanium Backup! It will definitely break the current installation.
– It is also discouraged to Restoring Apps + Data using Titanium Backup.

1. Boot into Recovery by one of the following method:
   – Power off the phone and keep pressing key combinations while turning on your phone.
   – If you have enabled USB debugging and you have ADB utility installed on your PC then you can execute the following command on a console or command prompt:

   adb reboot recovery

2. Wipe data factory reset, Cache partition, Dalvik Cache and Format the System partition using the recovery.
   – Here is a guide explaining how to wipe data using TWRP recovery.

   This will delete all your data on your phone. IGNORE IF YOU DON’T WANT TO OR IF YOU HAVE ALREADY DONE THIS. You may consider complete backup of your phone data or take a NANDROID backup of the current ROM.
   – How to backup all data on your Android Device.
   – how to take NANDROID backup using TWRP recovery.

3. Download the Moto E4 Plus Android Oreo ROM zip file from the above download link and copy the files to phone.
4. Flash the Moto E4 Plus RR Oreo ROM zip from device.
   – Here is a post explaining how to flash a ROM zip using TWRP.

Upgrading from earlier version of Resurrection Remix Oreo for Moto E4 Plus:

1. Copy the latest ROM zip file of Resurrection Remix Oreo for Moto E4 Plus to your phone.
2. Boot into Recovery.
3. Flash the latest RR Oreo ROM ZIP from your phone and wait till it finishes flashing.
   – Here is a post explaining how to flash a custom ROM using TWRP recovery.
4. Reboot and Enjoy

Reboot to system after flashing is done completely. Do the required initial setup and enjoy the Android Oreo ROM for Moto E4 Plus. If you face any problem following this guide or post installation then just login and leave a comment to get an instant reply.

Rooting Resurrection Remix Android Oreo ROM on Moto E4 Plus:

There is no inbuilt ROOT functionality available on this ROM.
Here is how to How to ROOT RR Oreo ROM, a step-by-step guide !!!

The above link is for LineageOS 15.1 Rooting guide, because RR Oreo is based on LineageOS 15.1.

 

Stay tuned or Subscribe to the Moto E4 Plus custom ROMs forum For other Android Oreo ROMs, Android Nougat ROMs, LineageOS ROMs, Resurrection Remix ROM, Omni ROM, AICP ROM, crDroid ROM, and all other device specific topics.

 

[Linux User]

Stock ROM or stock Firmware for Teeno S26 is now available to download. Here is how to flash stock firmware on Teeno S26 using Mediatek SP Flash Tool.

Although I will make a very clean beginner’s step by step guide, but it is also advisable for you to go through all the steps in detail, so that you understand what are you doing.

 

[su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]
DISCLAIMER:
THIS STOCK ROM FLASHING IS ONLY FOR Teeno S26 WHICH IS MEDIATEK MT6580 CHIPSET BASED DEVICE.
DON’T TRY TO FLASH ON OTHER MT6580 BASED DEVICES OR ANY OTHER DEVICE TYPE.
[/su_note]

[su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]FLASHING A STOCK ROM ON Teeno S26 WILL DELETE ALL DATA.
– IT ALWAYS A GOOD IDEA TO KEEP A BACKUP OF ALL DATA SUCH AS: SMS, PHONE CALL, CONTACT, MUSIC, IMAGES, etc.
– ALSO BACKUP THE IMEI AND NVRAM DATA OF YOUR PHONE.
[/su_note]

Required Guides and Downloads to Install Stock ROM/Firmware on Teeno S26:

• Mediatek VCOM Driver
• SP Flash Tool
• ROM Download link of stock firmware for Teeno S26
• Install stock ROM using SP Flash Tool

 

Why to flash Stock Firmware/ROM on Teeno S26:

There could be various reasons why you may want to flash a stock firmware on Teeno S26 to make it a new like phone. Following are some of the key benefits you get by flashing a stock firmware on Teeno S26:

• Flashing a stock ROM on Teeno S26 will make the phone new like at least from software point of view.
• If your phone has become too slow or lagging in performance after a prolonged period of usage, then installing a stock ROM/firmware may bring back the speed.
• If you have rooted your Android phone, then flashing a stock ROM will help you to restore your phone software to original state.

  [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Sometimes software factory reset from Android settings does not help you get rid of ROOT.
  In that case, you must flash a stock Firmware to bring back the phone to original state.[/su_note]

• Phone warranty will be VOID if you have ROOT on Android phone or have a custom ROM on Android phone. Flashing a stock Firmware/ROM will bring back the software to original state and will restore your warranty.

 

How to Flash Stock Fimrware / ROM on Teeno S26 using Mediatek SP Flash Tool:

1. Download and extract the Teeno S26 stock firmware files.
2. Download and install the VCOM driver on your PC.

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]VCOM driver is required for the SP Flash Tool to recognize your Teeno S26 Phone to be able to download stock Fimrmware.[/su_note]

3. Download and extract the Mediatek SP Flash Tool zip file.
4. Go to the extracted SP Flash Tool folder and open the flash_tool.exe file, which is the actual SP Flash Tool application.

   See the below screenshot:
   

5. By default the SP Flash Tool would have opened with the Download Tab open. If not then click on the Download Tab and then click on the choose button to load the Teeno S26 stock ROM scatter file.

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- You will find a scatter file with a name of somewhat MT6580_Android_scatter.txt in the Teeno S26 stock firmware package.
   – This scatter file contains all the partition information of Teeno S26 Mediatek phone and which binary file to flash on a which partition and address.[/su_note]

   See the screenshot below:
   

6. After that a file browser will be opened to find and select the Teeno S26 stock ROM scatter file.
   Go to the Teeno S26 stock firmware folder where you have extracted, select the Scatter file (somewhat MT6580_Android_scatter.txt) from there and click on Open.

   See the screenshot below:
   

7. After loading the scatter file, click on the Download button to start downloading the stock firmware to Teeno S26.

   [su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]Firmware download does not start just by clicking the Download button. You need to connect the phone in download mode, which we will be doing that in the later step.[/su_note]

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- SP Flash Tool automatically takes all the information and will show you the details of partition and binary file information. Verify all the details before start flashing the stock ROM or the stock firmware on your Mediatek phone.
   – Verify the download mode before flashing (marked by number 1 in the screenshot).
   – Verify which all partitions are being flashed (marked by number 2 in the screenshot). MAKE SURE THERE IS NO NVRAM OR IMEI PARTITION SELECTED HERE.[/su_note]

   See the screenshot below:
   

8. Now turn off your Mediatek Phone and wait for few seconds.
   Then you hold both the volume up and Volume Down button and connect the phone PC using a USB cable.

   – You see in the SP Flash tool, it will start downloading the firmware to the Mediatek Phone automatically.

9. After the stock ROM is flashed successfully on Teeno S26, you will see a Download OK confirmation on SP Flash Tool.

   See the screenshot below:
   

After being successfully install stock firmware or the stock ROM on Teeno S26, you can disconnect the phone and restart if it does not restart automatically.

If you face any problem installing the stock firmware on Teeno S26 using SP Flash Tool, then leave a reply on this thread. I will reply back as early as possible.

[su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Stay tuned or Subscribe to the Teeno S26 forum for recovery, rooting, custom ROM guides etc. and all other device specific topics.[/su_note]

[Linux User]

This is basically a rooting guide where I am going to tell you how to root Android phone and most importantly How to Root Mediatek phone. This guide works on any Mediatek phone (hopefully). I don’t know about the very latest Helio phones but this works for most of the other Mediatek chipsets. I strongly recommend you to go for a NANDROID backup as well as complete data backup and also please have all of your stock boot image, system image, bootloader images if any and be ready with a backup plan to execute if you endup with a bricked phone and also read the DISCLAIMER carefully. Before proceeding for the root process do some research on your own about the risks involved in Rooting a phone if you are doing it for the first time. Don’t do this in hurry and make sure that you have at least 1 hour of time to spend with this rooting process.

DISCLAIMER:
Installing TWRP may require your Mediatek phone’s bootloader to be UNLOCKED, which may VOID WARRANTY. Sometimes if not handled carefully then it may permanently damage your phone and prevent from BOOT. Understand that you are the only person making changes to the phone. In case of any damage or any kind of loss as a consequence of this installation, Neither the Developer nor we can be held responsible.

 

[Mediatek chipset rooting guide]

Have a full backup of your current data of your phone.
Follow the link for how to backup all the data on your android phone:
Step by step guide to take full backup of your phone data

After taking backup of your phone please make sure that you have the following things in hand to start the rooting method.

REQUIRED DOWNLOADS AND GUIDES TO INSTALL RECOVERY AND ROOT ANY MEDIATEK PHONE:

• Unlocked bootloader on Mediatek phone
• USB drivers for all MTK phones
• 15 Seconds ADB Installer or Minimal ADB and Fastboot for Windows
• Latest MTK Droid Root and tools
• Latest MTK SP Flash Tool for Windows
• SuperSu su binaries developed by Chainfire
• Fastboot and adb for Linux
• Latest MTK SP Flash Tool for Linux 64-bit
• Latest MTK SP Flash Tool for Linux 32-bit
• A Mediatek phone, PC and a USB cable
• A smart brain and patience. (Well, this is not mandatory though. :P)

 

NOTE:
Make sure you have installed your phone driver and downloaded all the necessary software that are needed in the next step.
Make sure that USB debugging is enabled on your phone under developer options.

Supported phones for this How to ROOT Mediatek Android guide:

– HTC Desire 616 rooting and Installing CWM based custom recovery
– Micromax Canvas A1 Android One rooting and Installing CWM based custom recovery
– Spice Android One Dream UNO Mi-498 rooting and Installing CWM based custom recovery
– Karbonn Android One Sparkle V Blue rooting and Installing CWM based custom recovery
– Xolo play 6x 1000 rooting and Installing CWM based custom recovery
– Xolo play 8x 1100 rooting and Installing CWM based custom recovery
– Xolo play 8x 1200 rooting and Installing CWM based custom recovery
– Micromax Canvas Nitro A310 rooting and Installing CWM based custom recovery
– Micromax Canvas cameo A290 rooting and Installing CWM based custom recovery
– Micromax Canvas Fire 2 A104 rooting and Installing CWM based custom recovery
– All old MTK chipset based older and newer phones support Rooting and Installing CWM based custom recovery

How to install TWRP recovery on Mediatek phone:

Installing a TWRP recovery on a Mediatek phone requires a scatter file to be created.
A scatter file of a Mediatek phone is what tells about the presence of different partition and the start address of each partition.

How to create scatter file for Mediatek phone:

This guide need the Droid MTK Tool. With the help of Droid MTK Tool we will create the scatter file of your Mediatek phone.

1. Download the Droid MTK Tool from the above Downloads section.
2. It’s in a zip file, so extract that file or open using WinRar or some application and then open the MTKDroidTools.exe file.
3. Enable USB Debugging under Developer Options, to make the phone accessible via ADB.- If you don’t know how to do this then here is How to Enable Developer Options and How to Enable USB Debugging and OEM unlock.
4. Then connect the phone using the USB cable to the PC.- When you connect the phone to the PC, MTKDroidTool will show all the information about your phone.

   

5. On the below portion of the screen you will see an Blocks Map button. Click on the button
6. On the next screen you have all the partition information and starting address of all the partitions.
   On the bottom of the screen you see a Create scatter file button.- Click on the button to create scatter file for your Mediatek phone.

   

7. Save the file in a location which you can remember and access easily.

Now Install TWRP recovery to Mediatek phone:

TWRP recovery download to a Mediatek phone is done by SP Flash tool, which uses a scatter file to know which address the recovery partition starts.
Make sure you have downloaded the SP Flash tool.
Here is how to install the TWRP recovery using the scatter file.

1. Open the SP Flash tool zip file and and then open the flash_tool.exe file.
2. Click browse on the the scatter-loading file section and select the scatter file you created earlier using the MTKDroid Tool.After selecting the scatter file SP Flash tool application automatically find available partitions and other details.

   

3. Now select the location next to the Recovery partition and select the TWRP or custom recovery file in .img format.
4. Then click on the Download button to start downloading/flashing of the TWRP recovery on your Mediatek phone as shown in the picture.
5. After clicking on the download button you will see a red bar on the bottom followed by a yellow bar.
   When the TWRP recovery download is done, SP Flash tool will alert you saying Download is done.

I will suggest you to watch the video first before starting the TWRP recovery install and root process.

Look at this link for a video guide.
[100% Working ROOT + CWM + ROM backup with SP-Flash Tools]
If things are executed correctly, then you will have a TWRP recovery on your Mediatek phone.
If you face any problem, then do login and comment here to get instant assistance.

Stay tuned or Subscribe to the Mediatek Development forum For other Mediatek related topics and hacks.

 

[Linux User]

Android Nougat 7.1 ROM, LineageOS 14.1 for Ascend Mate 2 has now arrived via a development build. This post provides the download link to LineageOS 14.1 ROM for Ascend Mate 2 (mt2) and guides through the installation process of the same. This LineageOS 15 Oreo ROM for Ascend Mate 2 is brought to you by developer MDMower.

DONATION TO DEVELOPER(S):

No donation link found for MDMower.

DONATION TO DEVELOPER:

No donation link found for the developer of this ROM.

If you want the OFFICIAL LineageOS 14.1 update for Ascend Mate 2 or Android Nougat ROMs for other devices then stay tuned to the LineageOS 14.1 ROMs list. For Android OREO based ROMs, stay tuned to the LineageOS 15 ROMs page or the AOSP Android Oreo ROMs devices list page.

DISCLAIMER:
THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK. Installing a custom ROM on a Ascend Mate 2 requires an unlocked bootloader on Ascend Mate 2, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of LineageOS 14.1 for Ascend Mate 2 Nougat ROM:

WHAT’S WORKING:
– Unknown

KNOWN ISSUES:
– Unknown

 

REQUIRED LINKS AND FILES FOR THIS LineageOS 14.1 for Ascend Mate 2 ANDROID NOUGAT CUSTOM ROM INSTALLATION:

• TWRP download for Ascend Mate 2

  – Here is theTWRP update guide for the Ascend Mate 2. This TWRP recovery guide requires an unlocked bootloader on the Ascend Mate 2.

• LineageOS 14.1 Download link for Ascend Mate 2
• Nougat GApps Download Link for LineageOS 14.1 ROM

Root binary is NOT inbuilt in LineageOS ROM, so you may need a separate SuperSu package or LineageOS su binary to install to gain ROOT access. Here is LineageOS 14.1 Rooting guide
If there is no in-built ROOT or it does not work for some reason then you can try SuperSU rooting guide to enable ROOT access.

HOW TO INSTALL/DOWNLOAD/FLASH/UPDATE THE Ascend Mate 2 TO THE LineageOS 14.1 BASED ANDROID NOUGAT ROM:

1. Follow this if you are flashing LineageOS 14.1 on the Ascend Mate 2 (mt2) for the first time, or coming from another ROM:

   Points to NOTE:
   – Try to avoid restoring apps backup using Titanium Backup. It may break things up.
   – Don’t restore system data using Titanium Backup! It will definitely break the current installation.
   – It is also discouraged to Restoring Apps + Data using Titanium Backup.

   • Download and Copy the GApps and the LineageOS 14.1 for Ascend Mate 2 Nougat ROM ZIP to your phone.
   • Boot into Recovery.
     Make sure to have a Custom recovery like CWM or TWRP or any other custom recovery. If not then download the recovery for Ascend Mate 2 from above link and follow the Mediatek TWRP recovery installation Guide (it’s a generic guide which will work for TWRP as well as CWM recovery or any other recovery)
   • Wipe data factory reset, Cache partition, Dalvik Cache and Format the System partition.
     – Here is a guide explaining how to wipe data using TWRP recovery.

     This will delete all your data on your phone. You may consider complete backup of your phone data or take a NANDROID backup of the current ROM
     – How to backup all data on your Android Device
     – how to take NANDROID backup using TWRP recovery

   • First flash the LineageOS 14.1 for Ascend Mate 2 Nougat ROM ZIP from device. Then flash the GApps zip from your device memory.
     – Here is a post explaining how to install LineageOS
   • Then reboot into recovery (don’t skip this) and flash the Gapps for LineageOS 14.1 package.
     – Here is a post explaining how to flash GApps using TWRP recovery.
   • Reboot and Enjoy Android Nougat with LineageOS 14.1 ROM on Ascend Mate 2.

2. Upgrading from earlier version of LineageOS 14.1 for Ascend Mate 2:

   • Copy the latest Ascend Mate 2 Lineage 14.1 ROM ZIP file to your phone.
   • Boot into Recovery.
   • Flash the LineageOS ROM ZIP from your phone.
     – Here is a post explaining how to install LineageOS
   • Then flash the LineageOS 14.1 Nougat GApps package.
     – Here is a post explaining how to flash GApps using TWRP recovery.
   • Reboot and Enjoy

Complete the initial setup and enjoy Android Nougat 7.1 with LineageOS on the Ascend Mate 2. After the installing LineageOS 14.1 for Ascend Mate 2, you may want to enable ROOT access on your phone and here is how you can do that:
How to Enable ROOT on LineageOS 14.1.

Stay tuned or Subscribe to the Ascend Mate 2 (mt2) forum For other Android Oreo, Nougat ROMs, LineageOS 14.1 ROMs, other custom ROMs and all other device specific topics.

 

[Linux User]

Hello Developers,I am A new user so if I am posting in wrong place,Please relocate the thread

Please Developers, Get a port for my android device as my port of unoffical port is failing/Refusing to install….Although I am newbie to all of this but The closest match is Coolpad 7320, MI XIOAMI REDMI 3G(HMNOTE1W),Doogee Dagger DG 550,Micromax Canvas Nitro …..

Well I tried porting xioami and micromax but of no use…Please port…
Device Details:-
Ram – 1 GB
ROM – 8 GB
Processor :- Mediatek MT6592 true octa core @ 1.7 GHZ
cam 13 and 2 megapixel,
* NOTE:- EMMC BLOCK- mmcblk0p8 -Android, mmcblk0p10 – Data, mmcblk0p9 – cache..
Stock os -4.2.2 Jellybean (Amazingly with Selinux permissive)
stock kernel -linux 3.4.32
(–Discontinued–)

Well the reason is I WANT RIDDANCE FROM JELLYBEAN…WANT NOUGAT OR ATLEAST MARSHMALLOW>
will be grateful if anyone help porting from existing mentioned device….
contact:- tanmayamitra@gmail.com

[Linux User]

This is Symphony Roar A50 (Android One) Nougat ROM flashing guide. Since the Android Nougat Source code release, till now we have many Android Nougat ROMs available for various devices. And now this time the Nougat ROM (build number: NRD90M) has arrived to Symphony Roar A50 which is brought to you by developer Nazmul hasan. Symphony Roar A50 Users must be thankful to the developers for their priceless efforts and lightning fast development.

THIS IS JUST AN ALPHA ROM AND CANNOT BE USED AS A DAILY DRIVER SOFTWARE. CHECK THE WORKING AND NON-WORKING LIST BEFORE FLASHING AND PROCEED AT YOUR OWN RISK.

DISCLAIMER:
Installing a custom ROM on a the Symphony Roar A50 requires the bootloader to be unlocked, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

 

Status of Nazmul Hasan’s Symphony Roar A50 (Android One) Nougat ROM:

WHAT’S WORKING:
– Not known

KNOWN ISSUES:
– Not known

 

REQUIRED DOWNLOADS AND LINKS FOR SYMPHONY ROAR A50 (ANDROID ONE) NOUGAT 7.0 ROM:

• Unlocked bootloader on Roar A50
• TWRP recovery download link for Roar A50.

  Follow the guide to flash the recovery: How to install recovery on a Mediatek device

• ROM Download link of Symphony Roar A50 Nougat ROM by Nazmul hasan
• Google Apps download link for the Nougat Symphony Roar A50 ROM
• Enable ROOT on Symphony Roar A50 Nougat ROM

Make sure you have a Linux/Windows PC or a MAC installed with Fastboot and adb binaries. If not then you can follow one of the following guides based on your PC OS:
– 15 Seconds ADB Installer for Windows
– Minimal ADB and Fastboot for Windows
– ADB Fastboot Installation guide for Linux or MAC

 

INSTALL/FLASH SYMPHONY ROAR A50 NOUGAT ROM (ANDROID 7.0 AOSP ROM):

1. Download the Symphony Roar A50 Nougat ROM zip file and a suitable Nougat Gapps zip file from the above download link and copy both the files to phone.
2. Boot into Recovery by one of the following method:
   – Power off the phone and keep pressing key combinations while turning on your phone.
   – If you have enabled USB debugging and you have ADB utility installed on your PC then you can execute the following command on a console or command prompt:

   adb reboot recovery

3. Wipe data factory reset, Cache partition, Dalvik Cache and Format the System partition using the recovery.
   – Here is a guide explaining how to wipe data using TWRP recovery.

   This will delete all your data on your phone. IGNORE IF YOU DON’T WANT TO OR IF YOU HAVE ALREADY DONE THIS. You may consider complete backup of your phone data or take a NANDROID backup of the current ROM.
   – How to backup all data on your Android Device.
   – how to take NANDROID backup using TWRP recovery.

4. First flash the Symphony Roar A50 Nougat ROM ZIP from device.
   – Here is a post explaining how to flash a custom ROM using TWRP recovery.
5. Now flash the Google Apps package.
   – Here is a post explaining how to flash GApps using TWRP recovery.

NOTE:
Reboot the phone when the flashing is done. Do the initial setup and enjoy the Nougat taste on Roar A50.

 

Stay tuned or Subscribe to the Symphony Roar A50 forum For other Android Nougat ROMs, CyanogenMod 14 ROMs, other ROMs and all other device specific topics.

 

[Linux User]

Stock ROM or stock Firmware for Vernee V2 Pro is now available to download. Here is how to flash stock firmware on Vernee V2 Pro using Mediatek SP Flash Tool.

Although I will make a very clean beginner’s step by step guide, but it is also advisable for you to go through all the steps in detail, so that you understand what are you doing.

 

[su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]
DISCLAIMER:
THIS STOCK ROM FLASHING IS ONLY FOR Vernee V2 Pro WHICH IS MEDIATEK MT6763 CHIPSET BASED DEVICE.
DON’T TRY TO FLASH ON OTHER MT6763 BASED DEVICES OR ANY OTHER DEVICE TYPE.
[/su_note]

[su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]FLASHING A STOCK ROM ON Vernee V2 Pro WILL DELETE ALL DATA.
– IT ALWAYS A GOOD IDEA TO KEEP A BACKUP OF ALL DATA SUCH AS: SMS, PHONE CALL, CONTACT, MUSIC, IMAGES, etc.
– ALSO BACKUP THE IMEI AND NVRAM DATA OF YOUR PHONE.
[/su_note]

Required Guides and Downloads to Install Stock ROM/Firmware on Vernee V2 Pro:

• Mediatek VCOM Driver
• SP Flash Tool
• ROM Download link of stock firmware for Vernee V2 Pro
• Install stock ROM using SP Flash Tool

 

Why to flash Stock Firmware/ROM on Vernee V2 Pro:

There could be various reasons why you may want to flash a stock firmware on Vernee V2 Pro to make it a new like phone. Following are some of the key benefits you get by flashing a stock firmware on Vernee V2 Pro:

• Flashing a stock ROM on Vernee V2 Pro will make the phone new like at least from software point of view.
• If your phone has become too slow or lagging in performance after a prolonged period of usage, then installing a stock ROM/firmware may bring back the speed.
• If you have rooted your Android phone, then flashing a stock ROM will help you to restore your phone software to original state.

  [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Sometimes software factory reset from Android settings does not help you get rid of ROOT.
  In that case, you must flash a stock Firmware to bring back the phone to original state.[/su_note]

• Phone warranty will be VOID if you have ROOT on Android phone or have a custom ROM on Android phone. Flashing a stock Firmware/ROM will bring back the software to original state and will restore your warranty.

 

How to Flash Stock Fimrware / ROM on Vernee V2 Pro using Mediatek SP Flash Tool:

1. Download and extract the Vernee V2 Pro stock firmware files.
2. Download and install the VCOM driver on your PC.

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]VCOM driver is required for the SP Flash Tool to recognize your Vernee V2 Pro Phone to be able to download stock Fimrmware.[/su_note]

3. Download and extract the Mediatek SP Flash Tool zip file.
4. Go to the extracted SP Flash Tool folder and open the flash_tool.exe file, which is the actual SP Flash Tool application.

   See the below screenshot:
   

5. By default the SP Flash Tool would have opened with the Download Tab open. If not then click on the Download Tab and then click on the choose button to load the Vernee V2 Pro stock ROM scatter file.

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- You will find a scatter file with a name of somewhat MT6763_Android_scatter.txt in the Vernee V2 Pro stock firmware package.
   – This scatter file contains all the partition information of Vernee V2 Pro Mediatek phone and which binary file to flash on a which partition and address.[/su_note]

   See the screenshot below:
   

6. After that a file browser will be opened to find and select the Vernee V2 Pro stock ROM scatter file.
   Go to the Vernee V2 Pro stock firmware folder where you have extracted, select the Scatter file (somewhat MT6763_Android_scatter.txt) from there and click on Open.

   See the screenshot below:
   

7. After loading the scatter file, click on the Download button to start downloading the stock firmware to Vernee V2 Pro.

   [su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]Firmware download does not start just by clicking the Download button. You need to connect the phone in download mode, which we will be doing that in the later step.[/su_note]

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- SP Flash Tool automatically takes all the information and will show you the details of partition and binary file information. Verify all the details before start flashing the stock ROM or the stock firmware on your Mediatek phone.
   – Verify the download mode before flashing (marked by number 1 in the screenshot).
   – Verify which all partitions are being flashed (marked by number 2 in the screenshot). MAKE SURE THERE IS NO NVRAM OR IMEI PARTITION SELECTED HERE.[/su_note]

   See the screenshot below:
   

8. Now turn off your Mediatek Phone and wait for few seconds.
   Then you hold both the volume up and Volume Down button and connect the phone PC using a USB cable.

   – You see in the SP Flash tool, it will start downloading the firmware to the Mediatek Phone automatically.

9. After the stock ROM is flashed successfully on Vernee V2 Pro, you will see a Download OK confirmation on SP Flash Tool.

   See the screenshot below:
   

After being successfully install stock firmware or the stock ROM on Vernee V2 Pro, you can disconnect the phone and restart if it does not restart automatically.

If you face any problem installing the stock firmware on Vernee V2 Pro using SP Flash Tool, then leave a reply on this thread. I will reply back as early as possible.

[su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Stay tuned or Subscribe to the Vernee V2 Pro forum for recovery, rooting, custom ROM guides etc. and all other device specific topics.[/su_note]