TWRP Recovery for Smartisan Nut Pro 2 and ROOT guide

TWRP Recovery for Smartisan Nut Pro 2 and ROOT guide

GCam Port | Google Camera APK v9.4 (September 2024) › Forums › Smartisan › Nut Pro 2 / U3 Pro (osborn) › TWRP Recovery for Smartisan Nut Pro 2 and ROOT guide

Viewing 1 post (of 1 total)
  • Author
    Posts
  • September 3, 2024 at 12:56 PM #46364
    Linux User
    Participant

    TWRP Recovery for Smartisan Nut Pro 2 / U3 Pro is now available to download. this post guides how to download and install TWRP on Smartisan Nut Pro 2 / U3 Pro and also guides how to ROOT Smartisan Nut Pro 2 / U3 Pro (using TWRP recovery).

    [su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]DISCLAIMER:
    THIS IS AN INITIAL UNOFFICIAL TWRP FOR Smartisan Nut Pro 2 / U3 Pro. FLASH AT YOUR OWN RISK[/su_note]

    [su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]INSTALLING THE TWRP NEEDS AN UNLOCK BOOTLOADER ON Smartisan Nut Pro 2 / U3 Pro.
    DURING THE BOOTLOADER UNLOCK PROCESS ALL THE PHONE DATA WILL BE ERASED.[/su_note]

    [su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]Smartisan Nut Pro 2 / U3 Pro ROOT MAY BRICK THE PHONE.
    MAKE SURE YOU READ THE ADVANTAGES AND DISADVANTAGES OF ANDROID ROOT BEFORE YOU PROCEED FURTHER.
    Before proceeding further you may consider backup all data on the phone.[/su_note]

    You are the only person making changes to your phone and I cannot be held responsible for the mistakes done by you.

     

    TWRP Recovery for Smartisan Nut Pro 2 / U3 Pro and ROOT guide
     

    Content structure:

    1. Required downloads to install TWRP for Smartisan Nut Pro 2 / U3 Pro
    2. How to install TWRP on Smartisan Nut Pro 2 / U3 Pro
    3. What you can do after installing TWRP on Smartisan Nut Pro 2 / U3 Pro
    4. Required downloads and guides for Smartisan Nut Pro 2 / U3 Pro ROOT
    5. Step-by-Step guide on Smartisan Nut Pro 2 / U3 Pro ROOT guide
    6. How to check if you have ROOT on Smartisan Nut Pro 2 / U3 Pro or NOT

    INFORMATION OF THIS TWRP FOR Smartisan Nut Pro 2 / U3 Pro:

    – TWRP version: 3.x.x
    – Supported Android Version: Android 6.0
    – Built from – OmniROM AOSP source
    – Custom ROM supported: AOSP or AOSP based Android Marshmallow 6.0 ROM

    DOWNLOAD LINK OF TWRP FOR Smartisan Nut Pro 2 / U3 Pro, OTHER DOWNLOADS AND REQUIRED GUIDES:

     

    STEP BY STEP GUIDE OF HOW TO DOWNLOAD AND INSTALL TWRP FOR Smartisan Nut Pro 2 / U3 Pro:

     

    1. Connect the Smartisan Nut Pro 2 / U3 Pro to the PC using the USB cable and install required USB driver
    2. Install 15 Seconds ADB Installer or Minimal ADB and Fastboot on Windows or Linux or MAC as per the PC you have
    3. Reboot the Smartisan Nut Pro 2 / U3 Pro into bootloader mode and Unlock bootloader of Smartisan Nut Pro 2 / U3 Pro
    4. Download the TWRP 7z zip file and extract it.
    5. Now connect your phone to the PC using a USB cable, if not connected yet.
    6. Enter the following command on the opened command window:
      adb reboot bootloader

      to put your phone into bootloader mode where you can flash/install TWRP for Smartisan Nut Pro 2 / U3 Pro.

      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]If your phone asks for permission; such as “Allow USB debugging” then just tap on OK to proceed.[/su_note]

    7. If you are on a Windows PC then just double click on the Flash-TWRP.bat or simply Flash-TWRP file to flash the TWRP.

    [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Above is the easiest way to flash TWRP on Smartisan Nut Pro 2 / U3 Pro.
    For some reason, if you are unable to flash using the above procedure, then follow the below steps to install TWRP on Smartisan Nut Pro 2 / U3 Pro.[/su_note]

    1. Connect the Smartisan Nut Pro 2 / U3 Pro to the PC using the USB cable and install required USB driver
    2. Install 15 Seconds ADB Installer or Minimal ADB and Fastboot on Windows or Linux or MAC as per the PC you have
    3. Reboot the Smartisan Nut Pro 2 / U3 Pro into bootloader mode and Unlock bootloader of Smartisan Nut Pro 2 / U3 Pro
    4. Then, on your PC, go to the directory where you have downloaded the TWRP for Smartisan Nut Pro 2 / U3 Pro and then open the command console or terminal on this directory on your PC.

      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- To open a command window on Windows OS in the current directory, press shift + Right Click anywhere on Windows explorer, or some folder.
      – Then on the menu opened, just press the “w” key on the keyboard or select “Open command window here” to open a command window.[/su_note]

    5. Now connect your phone to the PC using a USB cable, if not connected yet.
    6. Enter the following command on the opened command window:
      adb reboot bootloader

      to put your phone into bootloader mode where you can flash/install TWRP for Smartisan Nut Pro 2 / U3 Pro.
      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]If your phone asks for permission; such as “Allow USB debugging” then just tap on OK to proceed.[/su_note]

    7. Now when your phone is on the bootloader mode just execute the following command on the console:
      fastboot flash recovery twrp-3.2.x.x-xxx.img

      [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]While executing this command make sure to replace the twrp-3.2.x.x-xxx.img with the actual filename of the TWRP for Smartisan Nut Pro 2 / U3 Pro[/su_note]

    8. Wait for the fastboot command to install the TWRP for Smartisan Nut Pro 2 / U3 Pro.
      Once it is done, execute the below command:

      fastboot reboot recovery

      on the command console to start the phone in TWRP recovery mode.

    [su_note note_color=”#D8F1C6″ text_color=”#769958″ radius=”3″ class=”” id=””]That’s all. You should have the TWRP installed on your Smartisan Nut Pro 2 / U3 Pro.[/su_note]

    You may now want to ROOT Smartisan Nut Pro 2 / U3 Pro or may want to install some custom ROM or want to explore what else can you do with this TWRP? Head over to the following section to know more.

    What to do after you install TWRP for Smartisan Nut Pro 2 / U3 Pro:

    • You can enable Smartisan Nut Pro 2 / U3 Pro ROOT access
    • You can install one of the custom ROMs available for Smartisan Nut Pro 2 / U3 Pro
    • You can install some of the mods available for Smartisan Nut Pro 2 / U3 Pro

    Well, this isn’t it. You can install customized themes, sound mods, Xposed modules etc. after installing the TWRP for Smartisan Nut Pro 2 / U3 Pro.
    TWRP recovery is the gateway to many goodies for your phone.

    Now, if you want to ROOT Smartisan Nut Pro 2 / U3 Pro then below is a step-by-step by guide for the same.

    REQUIRED DOWNLOADS OR LINKS FOR Smartisan Nut Pro 2 / U3 Pro ROOT GUIDE:

    [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Make sure you have already unlocked the bootloader and installed TWRP for Smartisan Nut Pro 2 / U3 Pro

    – Well, this is a very important aspect to enable ROOT for Smartisan Nut Pro 2 / U3 Pro. The SuperSU zip file is developed in a way to be installed via a TWRP recovery or other custom recovery. Stock recovery may not be able install this SuperSU or Magisk ROOT on Smartisan Nut Pro 2 / U3 Pro.[/su_note]
     

     

    IMPORTANT NOTE:
    • The Smartisan Nut Pro 2 / U3 Pro will not be rooted just by installing the SuperSU APK file on your Android phone.
    • SuperSU APK Free or Pro version is just a SuperSU ROOT management application.
    • The SuperSU APK Free or Pro app will ONLY work if you have already ROOTED your Android Phone.

     

    Step-by-Step guide on how to ROOT Smartisan Nut Pro 2 / U3 Pro using SuperSU or Magisk zip file:

     

    1. Download and copy the SuperSU or Magisk ROOT file to Smartisan Nut Pro 2 / U3 Pro. (I hope you have already downloaded the SuperSU zip file from the above downloads section)
    2. Now restart the Smartisan Nut Pro 2 / U3 Pro to boot into TWRP recovery.
    3. Then, Select the Install from TWRP home screen, then select the SuperSU ROOT zip file from the file browser.
    4. Flash or install the SuperSU or Magisk zip file for Smartisan Nut Pro 2 / U3 Pro, by Sliding the Swipe to Confirm Flash on TWRP screen.

      Here is a screenshot how to flash the SuperSU ROOT for Smartisan Nut Pro 2 / U3 Pro via TWRP:
       
      Flash SuperSU ROOT for Smartisan Nut Pro 2 / U3 Pro via TWRP

    5. Wait for TWRP to flash the SuperSU or the Magisk. Once the flashing is done just reboot your device.
    6. Profit!!! You should now have a Smartisan Nut Pro 2 / U3 Pro ROOT enabled phone.

    How to check if ROOT is enabled on Smartisan Nut Pro 2 / U3 Pro or NOT?

    Install the ROOT checker app from the Play Store and verify if your phone is ROOTED or not.

    If you face any problems on this guide to install TWRP for Smartisan Nut Pro 2 / U3 Pro or to following the Smartisan Nut Pro 2 / U3 Pro root guide then, you can login and reply here. Either me or some other user on this forum will reply back to your query as soon as possible.

    Stay tuned or Subscribe to the Smartisan Nut Pro 2 / U3 Pro forum For other Android Custom ROMs, Lineage OS ROMs, and all other device specific topics.

     

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.