LineageOS 14.1 for Galaxy S3 LTE (i9305) Nougat ROM

[Linux User]

Installed on my S3 LTE i9305 successfully, everything is working except sim card :/
I am using Telenor sim in Pakistan and sim is not working. So please fix this bug soon and remind me to download the new update.
Overall great work, Thanks but this time going back to UnOfficial Marshmallow.

• This reply was modified 1 week, 6 days ago by Linux User.

[Linux User]

Wifi is not working . Saved but not connecting .

[Linux User]

The link for the ROM Download link  is dead. I can’t find the ROM in the menu on the left.

Did you discontinued this ROMs or is it and error?

[Linux User]

Hi,
I have some random reboot (hardware) mainly on audio streaming (sometime, one very 10 minutes), never on the wifi link. attached is my last_kmsg with a kernel panic

<Kernel panic – not syncing: subsystem_restart_wq_func[e56ff5e0]: Failed to powerup external_modem!>
I tried several recoveries (full clean), without success

Does anyone have an idea ?

Really great work, thanks

[Siba]

That was the link to the OFFICIAL LineageOS 14.1
Looks like the maintainer is nolonger maintaining this device.

Anyway, I have update the ROM link to an unofficial one.

[Linux User]

Hi @gulliver423 Your upload has not come. Try uploading once again.

And this seems to be a kernel BUG and hence will not help you in anyway by changing the recovery or anything else.

Also, give me all details of the ROM version used, date of the NIGHTLY build, recovery version used etc. so that I can raise a BUG to the LineageOS team on this.

[Linux User]

Dear Dev team,
I too having the same issue – SIM not working, I changed couple of sims but still not working.
Can you please fix it when you get time.

I am waiting for this fix or Lineage 15 for i9305.

Thanks for your great efforts on doing this.

Thanks,
Kotes

[Linux User]

Hi shibaa987

Recovery TWRP 3.0.2.1
ROM Lineage 14.1.20171108.nightly.i9305.signed.zip
KERNEL m3xx/m3:4.4.4/KTU84P/I9305XXUFPB1
BASEBAND i9305XXUFNI3
BOOTLOADER i9305XXUFNI3

My last_kmsg if attached file is out

”
<6>[ 199.807734] c0 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
<7>[ 199.814150] c0 usb usb2: usb_probe_device
<7>[ 199.814242] c0 usb usb2: configuration #1 chosen from 1 choice
<7>[ 199.814731] c0 usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[ 199.817143] c0 hub 2-0:1.0: usb_probe_interface
<7>[ 199.817234] c0 hub 2-0:1.0: usb_probe_interface – got id
<6>[ 199.817341] c0 hub 2-0:1.0: USB hub found
<6>[ 199.817448] c0 hub 2-0:1.0: 3 ports detected
<7>[ 199.817528] c0 hub 2-0:1.0: standalone hub
<7>[ 199.817602] c0 hub 2-0:1.0: no power switching (usb 1.0)
<7>[ 199.817694] c0 hub 2-0:1.0: global over-current protection
<7>[ 199.817790] c0 hub 2-0:1.0: power on to power good time: 4ms
<7>[ 199.817910] c0 hub 2-0:1.0: local power source is good
<7>[ 199.818000] c0 hub 2-0:1.0: no over-current condition exists
<7>[ 199.818100] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[ 199.825267] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 199.825428] c0 hub 1-0:1.0: port 2: status 0501 change 0001
<7>[ 199.915243] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
<7>[ 199.925436] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
<7>[ 199.925577] c0 hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
<7>[ 199.980305] c0 s5p-ehci s5p-ehci: port 2 high speed
<7>[ 199.980420] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 200.040206] c0 usb 1-2: new high speed USB device number 2 using s5p-ehci
<6>[ 200.210119] c0 mdm_subsys_powerup: mdm modem restart timed out.
<0>[ 200.210250] c0 Kernel panic – not syncing: subsystem_restart_wq_func[e56ff5e0]: Failed to powerup external_modem!
<4>[ 200.210448] c0 Backtrace:
<4>[ 200.210568] c0 [<c005322c>] (dump_backtrace+0x0/0x120) from [<c07783c4>] (dump_stack+0x20/0x24)
<4>[ 200.210711] c0 r7:e5734000 r6:c02d3e18 r5:c0778ad4 r4:c0c094a8
<4>[ 200.210844] c0 [<c07783a4>] (dump_stack+0x0/0x24) from [<c077897c>] (panic+0xac/0x204)
<4>[ 200.211003] c0 [<c07788d0>] (panic+0x0/0x204) from [<c0075f60>] (subsystem_restart_wq_func+0x2dc/0x2e0)
<4>[ 200.211154] c0 r3:c09a97a8 r2:e56ff5e0 r1:c0789500 r0:c09aa2f4
<4>[ 200.211271] c0 r7:e5734000
<4>[ 200.211349] c0 [<c0075c84>] (subsystem_restart_wq_func+0x0/0x2e0) from [<c00bf73c>] (process_one_work+0x168/0x558)
<4>[ 200.211528] c0 [<c00bf5d4>] (process_one_work+0x0/0x558) from [<c00bff20>] (worker_thread+0x178/0x410)
<4>[ 200.211697] c0 [<c00bfda8>] (worker_thread+0x0/0x410) from [<c00c4e14>] (kthread+0xb0/0xb4)
<4>[ 200.211882] c0 [<c00c4d64>] (kthread+0x0/0xb4) from [<c00a3d18>] (do_exit+0x0/0x92c)
<4>[ 200.212011] c0 r6:c00a3d18 r5:c00c4d64 r4:eb057e88
<6>[ 200.312538] c0 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
<0>[ 200.312660] c0 Rebooting in 1 seconds..
<7>[ 201.020055] c0 s5p-ohci s5p-ohci: auto-stop root hub
<0>[ 201.314555] c0 sec_reboot (104, emergency)

Samsung S-Boot 4.0 for GT-I9305 (Sep 12 2014 – 13:40:58)

EXYNOS4412(EVT 1.1) / 2044MB / 0MB / Rev 2 / I9305XXUFNI3 /(PKG_ID 0xe074018)

BOOTLOADER VERSION : I9305XXUFNI3

PMIC rev = PASS2(4)
BUCK1OUT(vdd_mif) = 0x03
BUCK3DVS1(vdd_int) = 0x28
cardtype: 0x00000007
SB_MMC_HS_52MHZ_1_8V_3V_IO
mmc->card_caps: 0x00000311
mmc->host_caps: 0x00000311
[mmc] capacity = 30777344

MODEL_NAME:{{GT-I9305}}
eMMC_SERIAL_NUMBER:{{1501004D4147344642F7A405D6089F8D}}

– read_bl1
pit_check_signature (PIT) valid.
initialize_ddi_data: usable! (5:0xe)
[RPMB] emmc_rpmb_open:
Get DATA success.

[RPMB] emmc_rpmb_close:
initialize_rpmb_data: usable! (GT-I9305:VERSION_-+A3)
PARAM ENV VERSION: v1.0..
set_charger_current: chg curr(bf), in curr(17)
set_charger_state: buck(1), chg(1), reg(0x05)
microusb_get_attached_device: STATUS1:0x3f, 2:0x00
set_auto_current: ta_state(0), curr(700)
init_fuelgauge: fuelgauge power ok
init_fuelgauge: not POR status
init_fuelgauge: is reset case, skip soc-cal.
get_table_soc: vcell(4001) is caculated to t-soc(77.927)
init_fuelgauge: start: vcell(4001), vfocv(4056), soc(76), table soc(77)
init_fuelgauge: finish: vcell(4001), vfocv(4056), soc(76), table soc(77)
init_microusb_ic: before MUIC: CDETCTRL:0x2d
init_microusb_ic: after MUIC: CDETCTRL:0x2d
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3b
PMIC_ID = 0x02
PMIC_IRQSRC = 0x00
PMIC_IRQ1 = 0x00
PMIC_IRQ2 = 0x00
PMIC_IRQ1M = 0xff
PMIC_IRQ2M = 0xff
PMIC_STATUS1 = 0x12
PMIC_STATUS2 = 0x00
PMIC_PWRON = 0x09
PMIC_RTCINT = 0x11
PMIC_RTCINTM = 0x3f
s5p_check_keypad: 0x0
s5p_check_reboot_mode: INFORM3 = 0 … skip
s5p_check_upload: MAGIC(0x66262564), RST_STAT(0x20000000)
s5p_check_upload: debug level is 4f4c!
s5p_check_upload: level low or unknown: skip 0
s5p_check_download: 0
microusb_get_attached_device: STATUS1:0x3f, 2:0x00
check_pm_status: normal reset, do not enter LPM mode.
cmu_div:1, div:7, src_clk:800000000, pixel_clk:38102400
s5p_dsim_display_config: VIDEO MODE
a2, 60, 90,
<start_checksum:481>CHECKSUM_HEADER_SECTOR :4096
<start_checksum:483>offset:50, size:6296
<start_checksum:485>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:20
Not Need Movinand Checksum
Movinand Checksum Confirmation Pass
[mobi_drv] add: 0x43e52500, size: 3933
MobiCore INIT response = 0
MobiCore RTM has initialized!
MobiCore IDLE flag = 0
MobiCore driver address 43e52500, size = 3933
MobiCore RTM Notified back!
MobiCore Driver loaded and RTM IDLE!
MobiCore RTM has been uninitialized!
load_kernel: loading boot image from 106496..
Verify_Binary_Signature: failed.
pit_check_signature (BOOT) invalid.
Set invalid sign flag
No need to update kernel type.

SMC Num = 0x83000001

mobismc success!!! [ret = 0]
[s5p_check_sboot_version_rpmb]cur_version:VERSION_-+A3, rpmb_version:VERSION_-+A3
rpmb_version:51, cur_version:51
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 1FC00000 A0000000
ATAG_SERIAL: 4 54410006 42f7a405 d6089f8d
ATAG_INITRD2: 4 54420005 42000000 163c82
ATAG_REVISION: 3 54410007 2
check_rustproof [0]
ATAG_CMDLINE: b1 54410009 ‘console=ram loglevel=4 androidboot.baseband=mdm sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=96 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=a9e8b102ee79091bce1a37f9ebc7c99d connie=GT-I9305_OPEN_EUR_c83922bf5d8c0260508331b814394821 androidboot.emmc_checksum=3 androidboot.boot_salescode= androidboot.odin_download=1 androidboot.bootloader=I9305XXUFNI3 androidboot.selinux=enforcing androidboot.warranty_bit=1 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=42f7a405d6089f8d snd_soc_core.pmdown_time=1000’
ATAG_NONE: 0 0

Starting kernel at 0x40008000…

SWITCH_SEL(3)
”

Previously, i used the aicp_i9305_n-12.1-rodman01-20170419 ROM, without random reboots (not so often)

hope this can help.

Newbie in Android ROM.
And many thanks for your job

[Linux User]

I think the kernel version that you have given “KERNEL m3xx/m3:4.4.4/KTU84P/I9305XXUFPB1” is not correct.

Can you go to Settings and in About Phone see the kernel version and reply here ?
It should be something like this: 3.0.101lineage-g5f96d9a

Waiting for your reply !

[Linux User]

Hi shibaa987,

Really a newbie, I am !!

The kernel was the one provided with the ROM Lineage 14.1.20171108.nightly.i9305 (3.0.10.1 lineage).

I switched back to AICP 12.1 rodman01.

Thanks

[Author]

Posts