cdre sh

test `whoami` = 'root' || echo "You must be root to execute the commands."
cdrecord -scanbus > /dev/null
if ! (pidof kerneld || test -f "/proc/sys/kernel/modprobe"); then
    echo "Neither kerneld nor kmod are running to automatically load modules".
fi
report_no_autoload() {
    echo "Ensure the module $1 is loaded automatically next time."
}
if test ! -f "/proc/scsi/scsi"; then
    report_no_autoload scsi_mod  &&  insmod scsi_mod
fi
if ! grep "^........ sg_" /proc/ksyms > /dev/null; then
    report_no_autoload sg  &&  insmod sg
fi
if ! grep "^........ sr_" /proc/ksyms > /dev/null; then
    report_no_autoload sr_mod  &&  insmod sr_mod
fi
if ! grep "^........ loop_" /proc/ksyms > /dev/null; then
    report_no_autoload loop  &&  insmod loop
fi
if ! grep iso9660 /proc/filesystems > /dev/null; then
    report_no_autoload iso9660  &&  insmod iso9660
fi
echo "The following is only needed for IDE/ATAPI CD-writers."
if ! grep ide-scsi /proc/ide/drivers > /dev/null; then
    report_no_autoload ide-scsi  &&  insmod ide-scsi
fi
cdrecord -scanbus

options ide-cd ignore=hdb            # tell the ide-cd module to ignore hdb
alias scd0 sr_mod                    # load sr_mod upon access of scd0
#pre-install ide-scsi modprobe imm    # uncomment for some ZIP drives only
pre-install sg     modprobe ide-scsi # load ide-scsi before sg
pre-install sr_mod modprobe ide-scsi # load ide-scsi before sr_mod
pre-install ide-scsi modprobe ide-cd # load ide-cd   before ide-scsi