Download and Install Stock Firmware on Selecline S6S6IN3G

[Linux User]

Stock ROM or stock Firmware for Selecline S6S6IN3G is now available to download. Here is how to flash stock firmware on Selecline S6S6IN3G using Mediatek SP Flash Tool.

Although I will make a very clean beginner’s step by step guide, but it is also advisable for you to go through all the steps in detail, so that you understand what are you doing.

 

[su_note note_color=”#F9D9D9″ text_color=”#AA4343″ radius=”3″ class=”” id=””]
DISCLAIMER:
THIS STOCK ROM FLASHING IS ONLY FOR Selecline S6S6IN3G WHICH IS MEDIATEK MT6580 CHIPSET BASED DEVICE.
DON’T TRY TO FLASH ON OTHER MT6580 BASED DEVICES OR ANY OTHER DEVICE TYPE.
[/su_note]

[su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]FLASHING A STOCK ROM ON Selecline S6S6IN3G WILL DELETE ALL DATA.
– IT ALWAYS A GOOD IDEA TO KEEP A BACKUP OF ALL DATA SUCH AS: SMS, PHONE CALL, CONTACT, MUSIC, IMAGES, etc.
– ALSO BACKUP THE IMEI AND NVRAM DATA OF YOUR PHONE.
[/su_note]

Required Guides and Downloads to Install Stock ROM/Firmware on Selecline S6S6IN3G:

• Mediatek VCOM Driver
• SP Flash Tool
• ROM Download link of stock firmware for Selecline S6S6IN3G
• Install stock ROM using SP Flash Tool

 

Why to flash Stock Firmware/ROM on Selecline S6S6IN3G:

There could be various reasons why you may want to flash a stock firmware on Selecline S6S6IN3G to make it a new like phone. Following are some of the key benefits you get by flashing a stock firmware on Selecline S6S6IN3G:

• Flashing a stock ROM on Selecline S6S6IN3G will make the phone new like at least from software point of view.
• If your phone has become too slow or lagging in performance after a prolonged period of usage, then installing a stock ROM/firmware may bring back the speed.
• If you have rooted your Android phone, then flashing a stock ROM will help you to restore your phone software to original state.

  [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Sometimes software factory reset from Android settings does not help you get rid of ROOT.
  In that case, you must flash a stock Firmware to bring back the phone to original state.[/su_note]

• Phone warranty will be VOID if you have ROOT on Android phone or have a custom ROM on Android phone. Flashing a stock Firmware/ROM will bring back the software to original state and will restore your warranty.

 

How to Flash Stock Fimrware / ROM on Selecline S6S6IN3G using Mediatek SP Flash Tool:

1. Download and extract the Selecline S6S6IN3G stock firmware files.
2. Download and install the VCOM driver on your PC.

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]VCOM driver is required for the SP Flash Tool to recognize your Selecline S6S6IN3G Phone to be able to download stock Fimrmware.[/su_note]

3. Download and extract the Mediatek SP Flash Tool zip file.
4. Go to the extracted SP Flash Tool folder and open the flash_tool.exe file, which is the actual SP Flash Tool application.

   See the below screenshot:
   

5. By default the SP Flash Tool would have opened with the Download Tab open. If not then click on the Download Tab and then click on the choose button to load the Selecline S6S6IN3G stock ROM scatter file.

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- You will find a scatter file with a name of somewhat MT6580_Android_scatter.txt in the Selecline S6S6IN3G stock firmware package.
   – This scatter file contains all the partition information of Selecline S6S6IN3G Mediatek phone and which binary file to flash on a which partition and address.[/su_note]

   See the screenshot below:
   

6. After that a file browser will be opened to find and select the Selecline S6S6IN3G stock ROM scatter file.
   Go to the Selecline S6S6IN3G stock firmware folder where you have extracted, select the Scatter file (somewhat MT6580_Android_scatter.txt) from there and click on Open.

   See the screenshot below:
   

7. After loading the scatter file, click on the Download button to start downloading the stock firmware to Selecline S6S6IN3G.

   [su_note note_color=”#FBF4DD” text_color=”#A38C68″ radius=”3″ class=”” id=””]Firmware download does not start just by clicking the Download button. You need to connect the phone in download mode, which we will be doing that in the later step.[/su_note]

   [su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]- SP Flash Tool automatically takes all the information and will show you the details of partition and binary file information. Verify all the details before start flashing the stock ROM or the stock firmware on your Mediatek phone.
   – Verify the download mode before flashing (marked by number 1 in the screenshot).
   – Verify which all partitions are being flashed (marked by number 2 in the screenshot). MAKE SURE THERE IS NO NVRAM OR IMEI PARTITION SELECTED HERE.[/su_note]

   See the screenshot below:
   

8. Now turn off your Mediatek Phone and wait for few seconds.
   Then you hold both the volume up and Volume Down button and connect the phone PC using a USB cable.

   – You see in the SP Flash tool, it will start downloading the firmware to the Mediatek Phone automatically.

9. After the stock ROM is flashed successfully on Selecline S6S6IN3G, you will see a Download OK confirmation on SP Flash Tool.

   See the screenshot below:
   

After being successfully install stock firmware or the stock ROM on Selecline S6S6IN3G, you can disconnect the phone and restart if it does not restart automatically.

If you face any problem installing the stock firmware on Selecline S6S6IN3G using SP Flash Tool, then leave a reply on this thread. I will reply back as early as possible.

[su_note note_color=”#D7E3F4″ text_color=”#728095″ radius=”3″ class=”” id=””]Stay tuned or Subscribe to the Selecline S6S6IN3G forum for recovery, rooting, custom ROM guides etc. and all other device specific topics.[/su_note]

[Author]

Posts