Linux User

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 3,213 total)
  • Author
    Posts
  • in reply to: HTC DESIRE 820 (SINGLE SIM) #23935
    Linux User
    Participant

    Do you know will desire 820 get android 7? (Official or Rom)

    in reply to: HTC DESIRE 820 (SINGLE SIM) #23915
    Linux User
    Participant

    I need rom for desire 820 to

    in reply to: HTC DESIRE 820 (SINGLE SIM) #29863
    Linux User
    Participant

    I cant believe that no1 is develop anything for this fantastic device,official Nougat is not availible becouse 820 is manufactured in 2014 …..but i hope that 1 day we will get Lineage :)

    Linux User
    Participant

    Hello,

    thank you for this project.

    I’m tring to find the TWRP image, but I can’t find it in both the link above or at TWRP site.

    At the TWRP site there is an image “Samsung Galaxy S5 Neo Exynos (s5neolte)”. Is this correct?

     

    Thanks,

    Andrea

    Linux User
    Participant

    [quote quote=23944]
    How can I solve this problem, I need suggestions please guys.
    [/quote]

    I suspect that you have a very old recovery installed on the phone.
    Can you try the latest LineageOS 14.1 for Grand DUOS and flash the TWRP and the ROM given in that link and let me know how it goes for you ??

    Linux User
    Participant

    If after successfully installing TWRP phone goes back to standard recovery mode try this:

    “Before you flash the recovery, untick the Auto Reboot option in ODIN. Then flash the recovery. After flashing in done, reboot your device directly to recovery mode from download mode by pressing Vol up + Power + Home button together. Now you will see the TWRP recovery is booted in your device. Now you can reboot normally and your TWRP will be installed.”
    (source: https://android.stackexchange.com/questions/143685)

    worked for me

    Linux User
    Participant

    Are you sure that you have successfully flashed the TWRP without ending up in any error??

    Otherwise, try with some older TWRP versions (3.0.2.0 or even some older) to see if you are able to run it successfully and rule out any TWRP specific issue.

    Linux User
    Participant

    im stuck in a bootloop , i couldnt enter recovery now, what should i do

    thanks

    Linux User
    Participant

    I use samsung galaxy grand dous. Unfortunately by mistake, I have attempted three back-to-back to install recovery, while I was using stock rom. Later, found that I had succeed in each attempt but misunderstood Volume up and down key. And more unfortunate case was finally while I caught that and entered i recovery mode but not twrp but in cwm recovery (my last trial was cwm recovery).

    I wipe data/factory reset, cache partition, dalvik cache

    (shown:{E:unknown volume for path [/sd-ext]
    dalvik cache wiped})

    and finally formated /system as instructed to install custom rom.

    Than I, install from sd card zip named- cm-14.0-20161023-UNOFFICIAL-i9082

    (shown: {Warning: No file_contestsTarget: samsung/baffixx/baffin:4.2.2/JDQ39/I9082XXUBMJ1:user/release-keys
    detected filesystem ext4 for /dev/block/mmcblk0p19
    detected filesystem ext4 for /dev/block/mmcb1kop21
    patching system unconditionally…
    E:unknown command [log]
    E:unknown command [log]
    detected filesystem ext4 for /dev/block/mmcb1k0p19
    script succeeded: result was [1.000000]
    Install from sdcard complete.})

    finally install gaap nano from sd card, which was installed just fine without wrong info.

    But finally as i reboot, my phone got stuck in starting screen in samsung galaxy grand GT-I9082 and does not go forward.

    How can I solve this problem, I need suggestions please guys.

    Linux User
    Participant

    Hi, could you help me. is giving this error.
    my model is samsung s7 edge SM-G935A

     

    <ID:0/004> Added!!
    <ID:0/004> Odin engine v(ID:3.1301)..
    <ID:0/004> File analysis..
    <ID:0/004> Total Binary size: 23 M
    <ID:0/004> SetupConnection..
    <ID:0/004> Initialzation..
    <ID:0/004> Get PIT for mapping..
    <ID:0/004> Firmware update start..
    <ID:0/004> NAND Write Start!!
    <ID:0/004> SingleDownload.
    <ID:0/004> recovery.img
    <ID:0/004> RQT_CLOSE !!
    <ID:0/004>
    <ID:0/004> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

    thank you

Viewing 10 posts - 1 through 10 (of 3,213 total)
Exit mobile version